Wireless LAN

An area that is more secluded and secure will be more appropriate for Jacket-X to run their business. This will lead to all access points on the Jacket-X network must be safeguarded. Wireless connection will not be open and outsider will not have access to any Ethernet ports or wireless connection. Jacket-X should also be careful when employees following the bring your own device (BYOD) policy to work especially if employees are using the network. Employees can cause substantial damage…

Assessments (Or “What do we have of value that must be protected?”) A. The Company Network Figure 1: Existing Company Network 1. Physical Devices a) The NETGEAR MR814 Wireless Router (all versions) has two key vulnerabilities. First, the MR814 only supports Wired Equivalent Privacy (WEP) encryption to secure traffic sent over the wireless network [1]. WEP has numerous, well documented vulnerabilities and exploits. In its standard implementation, WEP can be compromised easily with a…

Process of elimination lets me know that the mesh, bus, etc. could be use, but do not fit the needs of the company. Mesh could be used for the wireless access point that will be put in the student lobby but may not be logical for the entire network. Mesh could be a separate topology from the rest, but for simplistic purposed it was not picked. The bus physical topology does not allow for computers…

1.1.1 Types of Sensor Networks Terrestrial WSNs: - In Terrestrial WSNs, nodes are distributed in a given area either in a pre-planned manner (sensor nodes are placed according to optimal placement, grid placement, 2-d and 3-d placement models) or in an ad hoc manner (sensor nodes are randomly placed in the target area by dropping it from plane). After all battery power is limited and it cannot be reenergized, terrestrial sensor nodes must be provided with a maximum power source such as solar…

Some of the pratical uses of cyber attacks are- fake wireless access points, cookie theft, and file name tricks. Fake wireless access enables hackers to mimic the free wifi of the establishment they are currently in. When users coonect the hacker can then sniff the users computer for unprotected data. With cookies theft hacks gather information…

1.1 Introduction This chapter will briefly discuss the background of Software Defined Networking (SDN) and its use in Wireless Sensor Networks (WSN). It will also state the Problem Definition, the Aims & Objectives of this project, and the Methodology used to achieve those objectives. In the end, it will present an overview of the dissertation’s layout. 1.2 Background The Internet has made an enormous impact on the world of communications. It has interconnected billions of networking devices…

1) Linked Cluster Algorithm (LCA) [5], [6], [7]: LCA, was one of the initial clustering algorithms evolved. It was primarily developed for wired sensors, but later applied in wireless sensor networks. In LCA, a unique ID number is allotted to each node and has two means of becoming a cluster head. The first way is that if the node has the greatest ID number in the set including all neighbor nodes and the node itself. The second way is to assume that none of its neighbors are cluster heads,…

WBAN or Wireless Body Area Network is a new technology that has been invented for monitoring health condition of an individual. This is fitted in the body of a person Wire Sensor Network or WSN is possible due improvement of sensor technology as well as computer miniaturization. As the data related to patients are stored in a WBAN it is imperative that security of the data must be maintained. Body Area Network is a system comprising of wireless network of sensors to monitor health designed for…

proposal was presented by (Luo et al., 2012) in the form of Software Defined Wireless Sensor Network (SD-WSN). Up until now, very limited research work is carried out in this area. Some of the notable, proposed architectures for using SDN in WSN are: • Software Defined Wireless Sensor Network (SD-WSN) • TinySDN • Service-centric networking for URban-scale Feedback Systems (SURF) • Software Defined Networking in WIreless Sensor nEtworks (SDN-WISE)…

Part B: VoIP Computer-to-Computer Voice over Internet Protocol (VoIP) is the process of taking analog signals, such as a human voice, and transmitting them over the Internet as digital data. Computer-to-computer VoIP is usually thought of as the simplest way to use VoIP, as it simply requires a computer with basic peripherals, an internet connection and can easily be used with popular software such as Skype. What devices are involved from transferring Alice’s voice to the sound that Bob receives…