is controlled by the hypothalamus and pituitary gland by a buffering system. A buffer solution is used to maintain the pH at a safe acidity. “A buffer solution is an aqueous solution consisting of a mixture of a weak acid and its conjugate base or a weak base and its conjugate acid” (Boundless, 2010)
Equation 1 – Generic Buffer Equation
HA (aq) + H2O (l) --> H3O+(aq) + A-(aq)
Note that equation 1 is reversible, and all equations that are reversible have to be at a state of.equilibrium.…
RESULTS AND DISCUSSION
The discussion will cover the obtained results under the following heads:
1. Effect of some different parameters on the behavior of drying rate
Fig.1 showed the relation between drying rate and drying time under two drying methods of fruits peels. It was cleared that the drying rate decreased continuously with drying time. There was not any constant-rate drying period and all the drying operations are seen to occur in the falling rate period. The drying rates were higher…
Taurine Come From?
Taurine (2-aminoethanesulfonic acid) is an is an organic compound discovered in bull bile in 1827 and mainly found in different animal tissues mainly in bile and large intestines. The term Taurine has a Latin origin from the word taurus which means a bull. Taurine has many functions inside animal bodies like muscle development, cardiovascular functions, and nervous system development among other functions. Once extracted, this acid compound is used in several products…
3.7.1. Effect of solvent and pH
The influence of the solvent on Schiff base ligand L and its metal(II) complexes were studied. The results showed that the optimal solvent for Schiff base ligand L, Co(II), Ni(II) and Cu(II) complexes were CH3CN at λemi =320, 310, 316 and 330 nm, while the optimal solvent for Mn(II) complex was DMF λemi = 312 nm, as shown in Figure 7. The effect pH on the fluorescence intensity of Schiff base ligand L and its metal(II) complexes were investigated between…
Table 2: KHP Vs. NaOH Titration data
Initial KHP acid Volume (ml)
End KHP acid volume (ml)
Volume difference (ml)
Volume of NaOH Base Used (ml)
Table 3: Titration of HCl with NaOH
Initial NaOH Volume (ml)
End NaOH base volume (ml)
Volume difference (ml)
Volume of HCl acid Used (ml)
What are the Uric Acid Rich Foods? –
Uric acid is a chemical that is formed in the body when the body starts breaking down and this causes purine (purine) to grow. There are some food and drinks such as beer, mackerel, grind, beans, anchovies and dry beans. It is a special acid that travels through the kidneys in the blood and travels through kidneys and urine/urine and thus increases some conflicts.
If a number of uric acid increases in the blood then the cause of hyperuricemia becomes. In…
The Effect of pH levels on the Motility of Daphnia in Lake Ecosystems
The production, transportation, and use of chemicals by chemical industries can result in chemical pollution. This leads to a harmful effect on ecosystems and their balance of life (Linlin, Chen, 2012). The pH levels of aquatic environments are important because it affects the physiology of animals by changing their behaviors. The ion concentrations associated with the water and the organism’s survival can also…
Ravi raj Chemicals Company manufactures the sulphamic acid. During the process scrubber through SO3 gas liberate the atmosphere. So these SO3 undesirable gases are reducing. The SO3 gas is hazards and it is pollute the atmosphere. In this project we can solve the possible solution then apply to the plant scale.
1.2 Objective Of Projects
In these manufacturing process of sulphamic acid first raw material put at the batch reactor and after some time hot discharge…
2. Ezbet El Moraba and Al Manshyia well water treatment plants
2.1. Physicochemical parameters
Comparison between different physico chemical parameters was illustrated in table (6) and figures (15,16,17).
The mean value of residual chlorine in Ezbet El Moraba well water treatment plant was 0.03 mg/L, while that of Al Manshyia well water treatment plant was 0.14 mg/L.
The mean values of turbidity of Ezbet El Moraba and Al Manshyia well water treatment plants were 1.4 NTU and…
Ointments are semisolids expected for external application to the skin or mucous layers. They typically contain lower than 20% water and volatiles and more than 50% hydrocarbons, waxes, or polyols as the vehicle. Ointment bases known for use as vehicles fall into four general classes: hydrocarbon bases, absorption bases, water-removable bases, and water-soluble bases. Each therapeutic ointment has its base one of these four general classes.
• Hydrocarbon Bases: