3D modeling

    Page 10 of 17 - About 163 Essays
  • Personal Narrative: My Experience At Ellis Tech

    I came to Ellis Tech to develop a skill that not many know about or are capable of. I wanted to get hands on experience in different fields before I went on to study a specific field. The decision of attending Ellis Tech was difficult because I knew I'd be leaving behind my friends along with the traditional learning environment. However, I figured this decision would greatly benefit me in future and in college. Ellis Tech ended up providing me with many opportunities that other high schools…

    Words: 392 - Pages: 2
  • Analysis: Finding Hope A 3D Movie

    As per the study of Diaz, C. L., Quindoza, M. & Villarama, A. (2016), entitled “Finding Hope: A 3D Movie”, it plays for 10 minutes. This project features human characters. This 3D animation film is about the little boy left in a stranger’s house when he was young. The boy grew up to be an attention-seeker and tried everything he could to get attention from the people around him. The boy found a man who gave the attention he always seeks. Everything has stopped when the old man died due to heart…

    Words: 742 - Pages: 3
  • Solidcam Case Study

    SolidCAM is a powerful CAM product that has been especially designed for the shop floor. SolidCAM supports the complete range of major manufacturing applications including 2.5D Milling, 3D Milling, High-Speed Machining, Multi-sided Indexical 4/5 axes Milling, Simultaneous 5 axes Milling, Turning, Turn-Mill up to 5-axes, Wire edm and Solid Inspect. The current product, SolidCAM 2015 , has advanced through 31 years of continued development…

    Words: 1022 - Pages: 5
  • 3D Printing

    3D printing is a technology that is constantly evolving and finding better was to take what you image and to materialize into the reality and with this new product they have taken another step further. The Mcor ARKe is the world first 3D printer that can print and build multicolored 3D designs. Designed by a new contender who is coming out on the stage of 3D printing called Mcor Technologies. The secret to this printer lies in what the printer uses for its material and the process it goes…

    Words: 753 - Pages: 4
  • First Side By Side Geometry

    4.1 First Side by Side Geometry The first model shown in figure 3 was for twin tunnels already constructed at a centre to centre spacing of 3D. This model helped to identify the influence of construction sequence on surface and subsurface ground displacement upon excavating the first and second tunnels underneath the existing twin tunnels. Figure 3: First Side by Side twin tunnels 4.1.1 Surface Displacements The surface displacements at distances of 4.75m, 7.125m, 9.5m and 11.875m from the…

    Words: 1576 - Pages: 7
  • Distmo Case Study

    tion is determined using a straight- and - centroid line approach. We investigated the effect of the pennation angle for three healthy volunteers in two scenarios: deep squat and gait cycle. To our knowledge, this is the first study that calculates 3D pennation angle using a single image acquisition technique (MRI) and assesses the ef- fect of subject-specific pennation angle on gait analysis. The average pennation angle caculated for the quadri- quadriceps muscles for three healthy volunteers…

    Words: 1612 - Pages: 7
  • Bending Factor Case Study

    Two-Dimensional (2D) Hydrodynamic Modeling This section provides an overview of the theoretical fundamentals of the 2D hydrodynamic modeling. It is divided into four subsections dealing, first, with the governing equations of 2D-Modeling. Secondly, the methods used for spatial discretization are briefly discussed. Afterwards, the different types of grid structures used in numerical modeling are described. Then, to conclude on the fundamentals of 2D hydrodynamic modeling, the approaches…

    Words: 713 - Pages: 3
  • Advantages And Disadvantages Of Virtual Reality

    Virtual Reality Put on these goggles, go nowhere, and be transported anywhere – Virtual Reality. Virtual reality is an artificial environment that is created with software and presented to the user in such a way that the user suspends belief and accepts it as a real environment. It is all about sensory experience, which includes virtual taste, sight, sound, smell, and touch. The origin of the term "virtual reality" can be traced back to the French playwright, poet, actor, and director Antonin…

    Words: 1803 - Pages: 8
  • Monge V Maya Magazine Case Summary

    It was found that the mere broadcasting of the documented beatings during a riot in Los Angeles, was not transformative since “Reuters does not explain the footage, edit the content of the footage, or include editorial comments.” (149 F.3d 987, 993 (9th Cir. 1998)) However, work that is being placed in a specific way, and commentated on would be considered transformative. In this case, the certain arrangement of the work into a photo montage is considered transformative, not only of the…

    Words: 1723 - Pages: 7
  • Why Do We Need Animal Testing Persuasive Essay

    I am Patricia Morris, a student at Granada Hills Charter High School in southern California. I have a project to research and present an injustice that I am passionate about. Because of my love of animals and science, I chose animal experimentation as my topic. As I researched, I was inspired to fight for every living creatures’ right to quality of life. I have decided to help spread awareness of the dangers of animal testing, and to convince others to likewise push for change. In animal…

    Words: 557 - Pages: 3
  • Page 1 7 8 9 10 11 12 13 14 17

Related Topics:

Popular Topics: