This experiments goal was to successfully produce ZnI2 by using Zinc Sulfate (Heptahydrate) and Barium Iodide Dehydrate, which Jessica and I did with acceptable success. The definition of acceptable success for this experiment is measured by how close our percent yield was close to the ranges provided (0-2% being considered excellent precision and etc). Our percent yield was 92 % meaning that it was an acceptable, but not exactly as close to what we wanted it to be. In order to try and figure…
of a particular substance per a given volume of liquid. The DO concentration in a stream is the mass of the oxygen gas present, in mg/L or ppm. Two methods are used: 1. Titrimetic method 2. Electrometric method Calculation DO= volume of sodium thiosulfate * 0.2* 1000/ volume of sample K.DTERMINATION OF BOD: BOD was obtained by titrimetric method. Biological oxygen demand (B.O.D) is the amount of oxygen required for the microorganisms (bacteria) present in the waste water to convert…
DISCUSSION There are three chemical properties will be discussed which are combustion, reaction with bromine and reaction with potassium permanganate. Combustion was used to test the unsaturation of hydrocarbon. The degree of unsaturation refers to the number of the rings and / or multiple bonds present in the hydrocarbon molecule (McMurry, 2015). Hexane was a saturated hydrocarbon, it completely combusted and emitted carbon dioxide plus water. Cyclohexene was an unsaturated hydrocarbon, it…
Introduction Experiment five was a two-part experiment meant to have us practice our skills and then use those skills in actual data collection and analysis. In part one we used a sample of sodium saccharinate combined with a sample of a metal halide salt, our group used copper(II) chloride. The combination of these two samples allowed for the synthesis of a metal complex. In part two of the experiment we used a procedure similar to part one in order to collect phosphorus out of a sample of…
The first step is to put on your goggles and apron. Then you need to gather your materials. You then need to make observation of the hydrate. Observe the color, state, texture, etc. to smell the unknown substance you need to waft the substance by slowly moving the smell of the liquid to your nose. Step 2- For the lab my group changed the way we were doing the experiment for time. This is the first way that we did it for trails one to two. First you need to get a beaker and mass it on a scale…
and 0.3 grams of sodium carbonate was added in. Sodium carbonate prevents caffeine from…
Can Salt Harm the Environment? For many years, traffic due to road construction has been viewed as different. Driving to work or travelling from place to another with daily traffic due to road construction is becoming a challenge to all American people. The main task for highway engineers in winter is keeping the roads clear and safe from snow. Engineers are obliged to choose construction materials that are environment friendly and ecofriendly. For decades, engineers used the road salt deicing…
The researchers compared both biologically produced manganese oxides and chemically produced manganese oxides for the oxidation of diclofenac. Because biologically produced manganese oxides are known to have high specific surface areas and high catalytic reactivity, this substance offers higher rates of oxidation for diclofenac when compared to chemically produced manganese oxides.² If biologically produced manganese oxides prove to completely eliminate diclofenac from the water supply, the…
#27 Erick Roque The Exploding Lunch Bag Introduction “POP!” A balloon just blew up. But no, it was a plastic bag. But no one was there. So who blew it up? It turns out that it blew up by a mixture of vinegar, baking soda, and… WATER!!! What do you think, can you pop a bag with that mixture? Purpose The reason why I chose this experiment is because I have seen the reaction when both vinegar and baking soda go together… an explosion of vinegar. And if vinegar and baking soda can…
CAUTION: It is best not to get dichloromethane on your skin. Gloves are to be worn during this experiment, if improper safety precautions are taken there is a possibility of irritation, and or burning of the skin. CAUTION: Gas will build up in the separatory funnel while you are shaking it, so you must vent the funnel occasionally to prevent the stopper from popping out, causing a mess and possibly getting dichloromethane on your skin. ~During the pre-phase of this experiment it is…