Calcium hydroxide

The way that they identified was to measure the pH first. There was only a one strong base which was #66, so it was 1 M sodium hydroxide. And then there were two very strong acids, one of them didn’t show any visible reaction which is #65, so it was 1 M nitric acid, which means #60 was 1 M hydrochloric acid. #61 was a strong acid that didn’t react with any of the other solutions,…

purpose of this experiment is to determine the type of chemicals that are inside the mislabeled bottles. Materials: • pH strips • 8 bottles of known chemicals: o silver nitrate o iron (III) nitrate o copper (II) nitrate o sodium iodine o sodium hydroxide o nitric acid o lead (II) nitrate o sodium carbonate • 8 bottles of unlabeled chemicals the same contents as known chemicals • 1 well tray Procedure 1. Place 7-10 drops of each chemical (known and unknown) into separate wells in the well…

The reaction between Propanone and iodine under acidic condition Aims To find the order of reaction with respect to propanone, iodine and sulfuric acid, thus proposing a rate equation. Find rate constant at various temperature and with the use of the Arrhenius equation, find the activation enthalpy of the reaction. General Method {For step by step guide of the experiment see preparation page} By using known concentration of aqueous iodine solution (0.000 moldm-3, 0.005 mol dm-3, 0.015…

The purpose of this experiment was to determine the identity of nine solutions using the results of reacting pairs of solutions in an organized systematic manner. Known solutions were used on the first day. The second day, the solutions were placed in code-labeled bottles. The reactions from the previous day were then used to help identify which solutions were which, by closely monitoring which unknown solutions mixed with other unknowns and how they reacted, such as: color changes,…

the Excess Reagent 4. Stomach acid is made up of hydrochloric acid (HCl). How many percent by mass does hydrogen take up in the compound? A. 27% C. 1.6% B. 2.8% D. 2.0% 5. A piece of marble contains 8.74 x 1025 formula units of calcium carbonate (CaCO3). How many moles does it contain?…

(Un) substituted-2-phenyl-4H-3, 1-benzoxazin-4 one (1, 2) was converted to 3-amino-2-phenylquinazolin-4(3H)-one and its substituted analog under reflux for 6-7 hr with hydrazine monohydrate in ethanol. The concentrated solution was poured into ice cold water to obtain a solid product. The obtained solid was washed with water, filtered, dried and recrystallized from ethanol1. Synthesis of 3-(benzylideneamino)-2-phenylquinazolin-4-(3H)-one 5 (a-j) A mixture of 3-amino-2-phenyl-3H-quinazoline-4-one…

Post-lab: Recrystallization of benzoic acid Calculations: I initially poured 1.10 grams of impure acid into my flask. After the experiment was done, I had 0.54 grams of pure benzoic acid. This gives a difference of 1.10-0.54=0.56 g and a percentage of (0.54/1.10)*100=49.09% The true melting point of pure benzoic acid is 122.41°C and I received 126.9°C as my melting point. This gives a difference of 126.9°C-122.41°C=4.49°C and a percentage of (122.41/126.9)*100=96.46% Results: Impure benzoic…

In our Chemistry class, we the students had performed an experiment that involves with a soda can, being crushed. Going step by step, our group simply placed small amounts of water into the soda can. Then we placed the soda can on a hot surface which allowed the water to boil. Once the water was boiling, our group witnessed the steam coming out from the opening on top of the soda can and one of us picked up the soda can with beaker tongs. We quickly submerged it into cold water and the instant…

The extraction lab began with a .517g mixture of benzoic acid, p-nitroaniline, and azobenzene charged in a 125 mL Erlenmeyer flask mixed with 50 mL of Et2O. Once dissolved, the mixture is transferred the mixture into separatory funnel and begin acid extraction. 15 mL of 3 M HCl is added to the separatory funnel and inverted until a phase boundary is present. An additional 15 mL of 3 M HCl was then added and inverted again. The aqueous layer was removed through the separatory funnel and placed…

To begin the first part of the experiment, zeolite and magnetized zeolite had to be synthesized. First, it was necessary to set up a contraption to hold a thermometer in place. This was done using a split cork and a 3 prong clam on a ring stand. 50 mL of 3.0 M NaOH was then added to a 250 mL beaker with a magnetic stir bar placed inside. After placing the solution on the stir bar, 3.7560 g of (sodium aluminate) was added to the solution. The thermometer was also added to the solution, but it…