Page 1 of 50 - About 500 Essays
  • Stainless Steel Research Paper

    Stainless Steel (Car Components): Stainless steel which is also known as inox steel, is a steel alloy which features 10.5% of chromium. Stainless steel does not rust or stain like normal steel would and even though it is called stainless steel, it is not entirely stainless, because in low-oxygen, high salinity environments it is able to be stained. The main difference between stainless steel and general carbon steel is the amount of chromium present. Due to the amount of chromium that stainless steel contains, the stainless steel will form a chromium oxide film which will help prevent corrosion as it blocks the oxygen fusing to the surface of the steel and in turn blocks it from spreading to the steels internal structure. Whereas in general…

    Words: 818 - Pages: 4
  • High Manganese Steel Essay

    focused on the development of Advanced High Strength Steels (AHSS). The AHSS include Dual Phase (DP) steels, [1–10], High Strength Low Alloy steels (HSLA), Transformation Induced Plasticity (TRIP) steels, Twinning Induced Plasticity (TWIP) steels, and medium manganese steels, (Bouaziz et al., 2013). The majority of the research are focused on the development of third generation of steels due to interest in the mechanical properties of high manganese steels. Only recently the TWIP steels have…

    Words: 1368 - Pages: 6
  • Cold Formed Steel Essay

    of cold formed steel In general, cold formed steel has many important properties which make it significant building material, the main two properties of cold formed steel are: the yield point and the tensile strength and how are they related to formability of steel, most members in building industry are on high tensile loads, cold formed steel has a Huge tensile strength, however the ratio between the tensile strength and the yield strength is 1.2-1.8 .in addition to other good qualities of cold…

    Words: 1808 - Pages: 8
  • Stainless Steel Case Study

    Question 1 Part A: General Topic Properties of stainless steel • Corrosion resistant • Good tensile strength • Good low and high temperature service • Appearance • Hygienic • Has a respectable friction coefficient Corrosion resistant Stainless steel has a chromium-rich rust protective oxide thin film on the surface known as a passive layer, in which prevents corrosion by blocking oxygen diffusion to enter the passive layer and spreads rust into the internal material. As seen in Figure 1,…

    Words: 1639 - Pages: 7
  • Mild Steel Case Study

    5. CREATIVE PHASE Table IV Functional Development to Cost (An Incline) Function Creative Ideas & Development Estimated Cost (Rs) Provide Surface 1) Change the material to Mild Steel 40 2) Change the copper to brass 70 3) Combine function of bracket 85 (For sliding surfaces, copper facilitates lu-brication & high con-ductivity.) (A) The existing cost of the Incline + Bracket assembly = 112 …

    Words: 914 - Pages: 4
  • Cold Formed Steel Section Analysis

    Abstract Cold-formed steel section (CFSS) is a civil engineering material that still and always in ongoing research for utilising in building or construction works. The advantage of the CFSS is becoming so interesting in selecting it as a roof truss system and purlins. For having the roof truss system with stable and safe condition, the study of the truss member is carried out by using the cut-curving channel section. Before the cold-formed steel section has been curved, the process of curving…

    Words: 1092 - Pages: 5
  • Steel Industry In The 19th Century Essay

    25 years after President Lincoln was assassinated the United States became the first manufacturing nation in the world. The United States did what took England a hundred years to accomplish half the time. The last three decades of the nineteenth century overshadowed all that had come before. Industrialism contributed to the growth of cities and railroads across the nation. One of the most important developments was the revolutionizing of iron and steel. The steel industry emerged around…

    Words: 788 - Pages: 4
  • Essar Steel Case Study

    6. ABOUT COMPANY Essar Steel is a global integrated steel producer with an annual capacity of 14 million tonnes with a strong presence in intensive steel consuming markets of Asia and North America. It has operations in four countries; • A 10 MTPA integrated facilities in India • A 4 MTPA steel plant in Canada • A 7 MTPA Taconite plant under execution in USA • A 0.4 MTPA downstream complex in Indonesia Essar Steel India is an integrated steel producer with an annual…

    Words: 974 - Pages: 4
  • Tata Steel Swot Analysis

    expansion at Odisha, investments have been made in the supply chain logistics integrated with its downstream expansion initiatives. The raw material used in steel making, accounting for 60-70% of the cost, poses a key risk as it may be subject to supply disruption and market price volatility. The Company maintains significant integration of raw materials for its Indian operations and strategic sourcing for the other regions. To achieve greater raw material security, Tata Steel is also pursuing…

    Words: 2182 - Pages: 9
  • Perwaja Steel Sdn Bhd Case Study

    The Perwaja Steel Sdn Bhd was launched in 1982 and stared as a joint venture between the government-owned Heavy Industries Corporation (HICOM) and Nippon Steel Corporation in Japan (Perwaja Steel Sandal, 2009). Perwaja Steel Sdn Bhd built a steel plant in Terengganu to supply the domestic needs for steel products and which plant was costing about RM1 billion. But after that, Perwaja started to face production problems and also was encumbered with huge debt. In 1986, Perwaja was suffering from…

    Words: 924 - Pages: 4
  • Previous
    Page 1 2 3 4 5 6 7 8 9 50

Related Topics:

Popular Topics: