Polyvinyl chloride

Iodine is a metallic grey element found in the halogen part of the periodic table. In the early 1900s, many people in the U.S. were suffering from Iodine deficiencies which caused all sorts of health complications. The decision to add iodine to salt was made to remedy these deficiencies and the problems associated with them. Salt was picked as a host for the iodine, because of its widespread use and the ease at which iodine could be added. This decision did not come without a cost and today the…

What is Sodium cyanide? Sodium Cyanide is an inorganic Compound, it has a formula NaCN. Cyanide actually has a high affinity for metals which can lead to a high toxicity of the salt. Sodium Cyanide has a boiling point of 2,725°F (1,496°C) and it also has a melting point of 1,047°F (563.7°C). A common name for sodium Cyanide is sodium salt of hydrocyanic acid. Cyanide has an appearance of while crystalline or granular powder. This toxin releases a hydrogen cyanide gas which is…

Goggles are imperative for keeping your eyes safe in the lab. By wearing goggles you can protect your eyes from foreign items and substances from hurting them. Keeping goggles on at all times, when working with any chemical substance is mandatory, if any chemicals splash into the eyes, the eyes are protected by the goggles. The right clothing can help avoid many accidents in the lab. Wearing your lab coat can protect you from any chemicals coming in direct contact with your skin. Also,…

Adding distilled water to this mixture will eradicate any traces of salt (sodium ethanoate and sodium sulfate) and remaining soluble impurities when it is discarded (AUS-e-TUTE. 2015.) Any remaining traces of ethanoic acid and sulfuric acid is neutralised by sodium carbonate (as shown in equation 1) (Fischer esterification reaction), which is converted to soluble sodium sulfate, sodium ethanoate and carbon dioxide which is released by inverting the separating funnel, and opening the tap.…

In this experiment, identifying the acids, bases, or neutrality of the unknown substance in a specific set are used to find the actual substances. The following sets of substances could have been assigned: Set 1 - Silver nitrate (AgNO3), Manganese(II) nitrate (Mn(NO3)2), Barium nitrate (Ba(NO3)2), Hydrochloric acid (HCl), Sodium Hydroxide (NaOH); Set 3 - Silver nitrate (AgNO3), Barium nitrate (Ba(NO3)2), Hydrochloric acid (HCl), Sulfuric acid (H2SO4), Sodium Hydroxide (NaOH); Set 4 - Silver…

Communication /6 Problem #2 Use the chart you just created to answer the following questions. a) Which substance would be the most corrosive? /1 Sample number 2 is the most basic and corrosive substance between the four samples. With its very high pH of 12, it can be predicted that sample number 2 is the oven cleaner that contains Sodium Hydroxide. Sodium Hydroxide (NaOH) is highly corrosive due to its elements; the presence of oxygen and an electrolyte (Sodium – Na) cause corrosion, the…

is installed on the amino group using the corresponding acid chloride or acid anhydride. (3) Some acyl functions such as benzoyl, α-phenylcinnamoyl, and naphthaloyl are directly incorporated on the nucleobase using the corresponding anhydride (Watanabe and Fox, 1966; Bhat et al., 1989). Zhu et al. (2003) reported an improved synthesis of N-benzoylated nucleosides by reducing the amounts of chlorotrimethylsilane (TMSCl) and benzoyl chloride to nearly equivalent quantities. The major advantage of…

how does the temperature of water (H2O) change when chemical compounds - such as sodium chloride and sucrose - are added? In this experiment, the independent variable is the chemical compound being tested while the dependent variable is the temperature of the water. The constants are the surface being tested on which is a stove, the amount of water being used, the amount of grams used for the sodium chloride and the sucrose, and the time that is set for the water to heat up. What is controlled…

environment the student had, was water and sodium chloride. In this instance water was the model cell (what was in the dialysis tubing) and Sodium chloride was the surround environment (plastic cup). The initial weight of the model cell was 13.2g, but after sitting in the sodium chloride solution over night the cell lost water and only weighted 11.6g. Since the solution of the model cell- in this case water- left the cell and entered the surrounding Sodium Chloride it meant the cell had a…

Part one Make a 3 list of chemical safety hazards? The three chemical safety hazards are: Poison Toxic Corrosive Reactive Environmental hazards 2. What is Amalgam? Amalgam is mixture of metals of mercury with another metal and other metal. Almost all metal can be an amalgam with a form of mercury. 3. If you had to train someone on how to separate the mercury from the amalgam, what training would they need? WHY? If I had to train someone on how to separate the mercury…