Wcs 303

Front 1

Second person verification of a PMS TAG-OUT requires?

Back 1

Must be 3M PQS qualed

Must be physically present when first tag attached.

Front 2

A # next to a check means

Back 2

Mandatory related

Front 3

What does the ¢ indicates

Back 3

Performed by higher authority

Front 4

Which chapter in OPNAVINST 5100.19 provides guidance for electrical safety and tagout procedures?

Back 4

C9

Front 5

W/C of the following is a dual periodicity?

Back 5

M-2/S-2

Front 6

Who must review FBR after WCS submission

Back 6

LCPO/DIVO

DH

3MC

Front 7

What’s the ship 3M manual

Back 7

NAVSEAINST 4790.8C

Front 8

What PQS requires 301 as a pre-req?

Back 8

301 DCPO

Front 9

If a work candidate is to be written for a shipyard or contractor to accomplish,what should be on the “main lvl” block?

Back 9

Depot

Front 10

What are the 4 categories of IEM?

Back 10

LU, SU, PM, OT

Lay up, start up, periodic maint., Op Test

Front 11

Scheduling Aids are used to?

Back 11

To verify what maintenance requirements are applicable to the workcenter

Front 12

When two or more work center share a MIP it is considered to be what?

Back 12

Split MIP

Front 13

An urgent FBR is submitted when the reason for submission involves W/C of the following?

Back 13

Safety of equipment, personnel and ship.

Front 14

ACN FBR received must be implemented when?

Back 14

Effective immediately

Front 15

ACN stands for?

Back 15

Advance Change Notice

Front 16

A part can’t be ordered unless the work center responsible does...

Back 16

Open a work candidate

Front 17

Who screens and serialize PMS FBR?

Back 17

3MC

Front 18

What document provides instruction for tagout procedures?

Back 18

TUM 50400-AD-URM-010-rev 7

Front 19

What’s the purpose of CSMP?

Back 19

Provide shipboard managers w/ a consolidated listing of deferred maint to identify the material condition of the ship

Front 20

When a Navy NEC requires, DCPO or Safety PO is assigned substitution of other maintenance personnel is allowed to perform this maintenance?

Back 20

No

Front 21

What is the purpose of the tag out procedures

Back 21

Prevent improper operation when component, equipment, system or portion of a system is isolated or in abnormal condition

Front 22

Who is responsible for determining equipment IEM Status

Back 22

DH

Front 23

What do you use to decide scheduling of dual periodicity coded MRCs?

Back 23

Notes in MIP and scheduling AIDS.

Front 24

W/c category of IEM is accomplished on a reoccurring basis during the inactive period to prevent equipment deterioration

Back 24

Periodic Maintenance

Front 25

What required when you transfer hazmat to another container

Back 25

Label

Front 26

What’s the difference between a caution and warning statement on an MRC

Back 26

Warning injuries/ caution causes equip damage.

Front 27

Urgent FBRs are submitted how?

Back 27

Naval message

Front 28

W/c item meets criteria for a preferred maint action?

Back 28

Req assistance from external activity and any maintenance is not expected to be accomplished by ships force w/in time frame prescribed by TYCOM

Front 29

Y code in SYSCOM MRC control number 10 FLRP Y indicates?

Back 29

Repair parts are required to perform the maintenance

Front 30

OPNAVINST 4790/Cic Refers to

Back 30

Ship’s configuration change form

Front 31

C1 MYXN N N indicates

Back 31

No parts required

Front 32

When can a MIP NOT applicable to a work center be deleted

Back 32

When FBR is approved for deletion of mip

Front 33

What instruction dictates requirements for HAZMAT container labeling

Back 33

OPNAINST 5100.19series

Front 34

What should be reviewed by WCS a week prior

Back 34

SKED forecasting report

Front 35

What FBR Is technical in nature and is used to report technical discrepancies inhibiting PMS performance

Back 35

CAT B

Front 36

W/c person has authority to sign for issuing or clear tags and labels?

Back 36

Authorizing Officer

Front 37

Which is a convenient related maintenance

Back 37

Q-3 (M-2)

Front 38

When maintenance is completed by multiple people who is responsible for signing the 13 week accountability log

Back 38

Person in charge or most senior person assigned

Front 39

What does # sign mean next to a primary check?

Back 39

Mandatory (mandatory related maintenance)

Front 40

If the work candidate is a safety related discrepancy w/c section of the work candidate requires a brief description of the safety hazard involved?

Back 40

Problem description

Front 41

What is the intent of a spot check

Back 41

Ensure the maintenance was completed and correctly performed.

Front 42

What does a change in MIP and LOEP indicate?

Back 42

C

Front 43

Which maintenance actions ensures equipment is in a condition suitable for operation or to reactivate a piece of equipment or system for after a performed prolonged period of time?

Back 43

SU start up

Front 44

Situational requirements & unscheduled maintenance are examples of what?

Back 44

Non Calendar Periodicity

Front 45

When does a maintenance person sign for their maintenance?

Back 45

After successfully completing maintenance

Front 46

Who overall ensures 3M is functional & meets required standards?

Back 46

CO

Front 47

How many days can a work candidate be in the review and queue?

Back 47

7

Front 48

When may MP omit non applicable line items on an MRC that do not pertain to current equipment / configuration?

Back 48

When step is followed by “if applicable” when a note identify steps to be omitted exist on MRC

Front 49

Who is responsible for CSMP accuracy, content and weekly reviews w/ LCPO?

Back 49

Divo