• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off

Card Range To Study



Play button


Play button




Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

8 Cards in this Set

  • Front
  • Back

What is indicated by the markings on the heads of solid shank rivets ?

The material that they are made of, and indirectly, their strength.

How can you keep heat treated aluminum alloy rivets soft enough to install after the quenching process ?

If the rivets are stored in a freezer they will soft for several days.

What is the grip length of a bolt ?

The length of the unthreaded portion.

In what way are AN standard steel bolts identified ?

By the code markings on the bolt heads.

What is the difference between a close tolerance bolt and a general purpose bolt ?

Close tolerance bolts are machined to more accurate dimensions.

For what types of applications are self-locking nuts not allowed ?

Self locking nuts may not be used when either the bolt or nut is subject to rotation.

If the maintenance procedures do not specify a torque value for a bolt or nut, how can you determine the proper values ?

Consult a standard torque table such as found in AC 43.13-1B.

What is the most commonly used type of aircraft control cable ?

Extra flexible 7X19 stainless steel cable.