50m Lactose Synthesis Lab

Improved Essays
As a result, lactose is a competitive inhibitor. In the presence of the inhibitor, the slope of the Lineweaver-Burk plot becomes the equation below.
Using equation 7 along with the Km and the Vmax from series A, the Ki of Series B and C were calculated. The concentration of inhibitor for 50mM lactose was found to be 35714 μM using equation 1. Similar to the substrate concentration, the inhibitor concentration can be found using the same equation, but substituting in the inhibitor molar concentration and volume in place of substrate information. The inhibitor concentration was used along with the slope of series B to find Ki. A sample calculation is shown below. Then the same steps were used to calculate the Ki for series C. But, the inhibitor

Related Documents

  • Great Essays

    Amylase Experiment

    • 1123 Words
    • 5 Pages

    Abstract: Amylase in the body is used to break down polysaccharides into monosaccharides. The monosaccharides are simple sugars that are used to give the body energy. This effect was investigated in an experiment designed to show the breaking down of starch solution. A water bath was used to heat water up to 60oc. Pieces of dialysis tubing were wet and had starch solution put inside.…

    • 1123 Words
    • 5 Pages
    Great Essays
  • Improved Essays

    Whey Lab

    • 832 Words
    • 4 Pages

    If More Acid were Added, Would the Mass of the Curd Increase? Purpose The purpose of the lab was to find out if the mass of the curd would increase if more acid were to be added to the milk. Background Information…

    • 832 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    State the optimum pH for sucrase activity and describe how sucrase activity changes at more acidic and more alkaline pH values. Table 2: Effect of Temperature on Sucrase Activity Optical Density 10 °CC (50 °F) 20 °C (68 °F) 30 °C (86 °F) 40 °C (104 °F) 50 °C (122 °F) 60 °C (140 °F) 70 °C (158 °F) 1 0.006 0.273 0.791 0.940 0.927 0.807 0.613 2 0.010 0.285 0.761 0.954 0.934 0.846 0.604 3 0.009 0.255 0.773 0.941 0.907 0.845 0.642 average 0.008 0.271 0.775 0.945 0.923 0.833 0.620 Effect of Temperature on Sucrase Activity 2. Was the rate of increase of sucrase activity higher at a pH of 8.5 or a pH of 5.5?…

    • 1040 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    What predictions would you make about the enzyme activity if you were to continue to change each of the factors in Parts A – E? The predictions that would be concluded about the enzyme activity if it were to continue and change each of the factors in Parts A – E, would be that enzyme activity will decrease due to the optimal temperature, pH, concentrations, and metal salt concentration not being obtained. How does changing the concentration of enzyme affect the rate of decomposition of H2O2?…

    • 680 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    The purpose of the cellular metabolism lab is to determine the effects of inhibitors and other variables on the rate of metabolism in the Krebs Cycle. Inhibitors compete with the substrate to bind to the enzyme, thus slowing down the production of FADH2. When the production of FADH2 is slowed down, the reaction will proceed too slowly for metabolic purposes. In this lab, the enzyme that was catalyzing the reaction was the bean extract. To mimic the FAD that is used in the Krebs cycle, we used 2,6-dichlorophenolindophenol (DPIP).…

    • 718 Words
    • 3 Pages
    Improved Essays
  • Improved Essays

    Uncatalyzed Reaction Lab

    • 882 Words
    • 4 Pages

    Introduction In this experiment, we mixed different amounts of reactants and measured the volume of O2 they produced so that we could determine the rate and order of the reaction. Three trials were done, the first trial acted as a baseline, then the following two trials each varied the concentration of a single reactant, allowing us to calculate the order of the reaction. Additionally, the temperature of the solution was changed to see what effect that would have on the rate. Using this information the activation energy for this reaction could be calculated and compared to the activation energy of the uncatalyzed reaction.…

    • 882 Words
    • 4 Pages
    Improved Essays
  • Improved Essays

    Kcat Lab

    • 779 Words
    • 4 Pages

    The Michaelis constant, Km, is the amount of substrate needed for the enzyme to obtain half of its maximum rate of reaction. (Oregon 2015) It reveals the enzymes affinity for the substrate and shows the magnitude of the enzymes affect on changing the rate of the reaction. For example, an enzyme with a high Km needs a large concentration of substrate to efficiently increase the rate of the reaction. (Oregon 2015)…

    • 779 Words
    • 4 Pages
    Improved Essays
  • Superior Essays

    Amylase Biology Lab Report

    • 2820 Words
    • 12 Pages

    The Effect of Change in Temperature Conditions on Enzymes Bacillus licheniformis Amylase and Aspergillus oryzae Amylase Over Time ____________________________________ Roxanna Flores PID: 5199946 Lab Section U26 Group Members: Roudabyna Taleb Abstract This laboratory was performed in order to be able to determine the effect of temperature over time on bacterial amylase Bacillus licheniformis and fungal amylase Aspergillus oryzae. Bacterial amylase was introduced into four singular test tubes at different temperatures. A starch solution was added to each to be able to observe the behavior of the enzyme.…

    • 2820 Words
    • 12 Pages
    Superior Essays
  • Improved Essays

    Moreover, the treatments were slightly different for each sugar and yeast strain. These number as well as Figures 1 and 2 indicate that there was slightly more growth in glycerol for both strains of yeast compared to sucrose. However, while the growth of glycerol may have been slightly larger, the T-test calculations proves that this study is not significant because the p-value was greater than…

    • 1398 Words
    • 6 Pages
    Improved Essays
  • Decent Essays

    The Eymology Of Lactose

    • 406 Words
    • 2 Pages

    The molecule Lactose has the biological function of being used as energy in the body, like a carbohydrate. When you consume it, you break it down into glucose then galactose. You use enzymes to break it into these two parts, which releases energy throughout the body. You can use other carbohydrates without an ill effect, therefore you don’t really need to use lactose. The common name is Lactose, the IUPAC name is β-D-galactopyranosyl-(1→4)-D-glucose.…

    • 406 Words
    • 2 Pages
    Decent Essays
  • Superior Essays

    This compound contains dextrose in addition to pure monk fruit extract. This information, combined with the Stevia data, implies that the dextrose was not the determining factor in the amount of fermentation that occurred in these two solutions. Rather, it is likely that the monk fruit molecule itself was slightly more difficult to hydrolyze than the Stevia molecule. The yeast in the Equal solution produced slightly less carbon dioxide than those in the Monk Fruit in the Raw tube.…

    • 1366 Words
    • 6 Pages
    Superior Essays
  • Improved Essays

    Yeast Fermentation Lab

    • 1039 Words
    • 5 Pages

    Fermentation is the process of anaerobic respiration of yeasts in the absent of oxygen. The enzymes in the yeast assist the breaking down of the glucose and released alcohol and carbon dioxide. The producing of carbon dioxide means fermentation is taking place. It can be affected by such as temperature and pH level. Some organisms use fermentation to produce ATP without oxygen.…

    • 1039 Words
    • 5 Pages
    Improved Essays
  • Improved Essays

    By calculating the rate of reaction and studying the effects of varied conditions on the reaction, a great deal can be learnt about the enzyme, including how the enzyme could be inhibited, the catalytic mechanism of the enzyme etc. One of the most well-known ways to look at enzyme kinetics is the Michaelis-Menton equation, which relates reaction rate (V) to concentration of substrate ([S]). Its equation can be used to work out the maximum rate of reaction of the system (Vmax) and the substrate concentration at which the reaction rate is half of Vmax (Km, also known as the Michaelis constant). Michaelis-Menton shows that the rate of reaction is dependent of the rate of formation of the enzyme-substrate complex and rate of formation of the product. This means that in the enzyme assay, the rate of reaction is dependent on the formation of NAD+ from NADH (Scopes, R.,…

    • 1627 Words
    • 7 Pages
    Improved Essays
  • Superior Essays

    Then a linear regression line is added and determined in a y = mx + b format, where m is the slope. ΔH is calculated by taking the negative constant 8.314 J/K*mol and multiplying it by the negative slope. The value for ΔH is positive meaning that heat must be added for potassium nitrate to dissolve. ΔS is calculated by taking ΔH and subtracting ΔG, then divide by the temperature in kelvin. This is calculated separately for each trial and then the separate values for each trial are averaged together.…

    • 1221 Words
    • 5 Pages
    Superior Essays
  • Improved Essays

    Milk Lab Report

    • 1015 Words
    • 5 Pages

    The aims of this experiment were to investigate the effect of milk solid content and the varying temperatures of heat pretreatment on yoghurt quality to determine the difference in pH and titratable acidity of fermented milk. In order to carry out this experiment and gain accurate results three variations were tested: yoghurt produced with whole milk pasteurised at 72 °C for 15 seconds, 85 °C for 15 minutes and then whole milk with added 5 % milk solids also heated at 85 °C for 15 minutes, after this pretreatment stage all variables were fermented for 120 min at 44°C. Table 1 shows the varying results of whole milk and whole milk with 5% SMP; in regards to °Brix, pH and titratable acidity, as shown in figure 1 indicates that whole milk with added 5% SMP treatment excels in all three testing components especially with °Brix. The °Brix score for whole milk 5% SMP sample result is 4.56° higher than the °Brix measurement for the whole milk sample.…

    • 1015 Words
    • 5 Pages
    Improved Essays