Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
24 Cards in this Set
- Front
- Back
What is the advantage ofusing a duct work system for air conditioning rather than several window airconditioners?
|
Provides even temperature throughout the house.
|
|
What are three characteristics of a duct system that has been designed and installed properly? |
Little draft felt Little noise heard Even Temps felt |
|
What are the two sides of a duct system called? |
Return and supply
|
|
What type of air pressure does each side of the system have? |
Return = negative pressure
Supply = positive pressure |
|
What type of blower does the central air conditioner and furnace have? |
Centrifugal
|
|
What is the duct called that connects the furnace and trunk line? |
Plenum |
|
What is the duct called that goes down the length of the house to distribute the air to the individual ducts that goes to the rooms? |
Trunk Line |
|
What are the ducts called that deliver the air to the individual rooms? |
Branch |
|
What are the four basic types of duct systems? |
1. Radial duct system
2. Extended Plenum duct system 3. Reducing Plenum duct system 4. Perimeter Loop duct system |
|
What is the easiest and cheapest type of duct system to install? |
RadialDuct System
|
|
Where will the radial duct system be located in a basement or crawl space? |
Crawl space |
|
What is the maximum length of a trunk line on each side of the furnace with an extended plenum system? |
24 feet |
|
What is the advantage of using a reducing plenum system in a large house? |
Maintainsair velocity all the way through the trunk line.
|
|
What type of duct system is good to use with a slab home? |
Perimeter Loop Duct System
|
|
What are the four outlet locations of ducts? |
1. High inside wall
2. Low inside wall 3. Ceiling 4. Floor perimeter |
|
Where would the return be located for a high inside wall register installation? |
Outside wall |
|
Would a high inside wall installation be better for heat or cooling? |
cooling |
|
What type of outlet installation gives the worst airdistribution?
|
Low Inside Wall
|
|
What is the disadvantage of a ceiling outlet installation?
|
Can create drafts on occupants
|
|
What is the best type of outlet installation for residential homes?
|
Floor Perimeter Registers
|
|
Compared to the pressure in the house, is the air in the supply negative or positive pressure?
|
Positive |
|
What is the pressure in the return duct compared to the house pressure?
|
Negative |
|
What is the component that creates these pressure differences in the supply and return?
|
Blower |
|
What is the unit of measurement we use to measure air pressure in the duct?
|
Inches of water column
|