45 Rbm Engineer

Front 1

Reduction Gears Pressure Engaged

Back 1

Normal - 186-265psi

Disabling – Less than 186psi or
More than 265psi

Front 2

Reduction Gears Pressure Disengaged

Back 2

Normal – 15-65psi

Disabling - Less than 15psi or
More than 65psi

Front 3

Reduction Gears Temperature

Back 3

130-185F

Front 4

Type Lube Oil

Back 4

15W40

Front 5

Type Hydraulic Oil

Back 5

AW32

Front 6

Hydraulic Oil Capacity

Back 6

9 Gal

Front 7

Engine Oil Capacity

Back 7

43 Qts. – 10.75 Gal

Front 8

Reduction Gear Lube Oil Capacity

Back 8

2.8 Gal

Front 9

Lube Oil PSI @ 2300RPM

Back 9

Normal: Greater than 41 psi
Disabling: Less than 31 psi
Alarm: Sounds at 30 psi

Front 10

Reduction Ratio

Back 10

1.02:1

Front 11

CODE 44

Back 11

High Water Temp

Front 12

CODE 45

Back 12

Low Lube Oil

Front 13

Jacket Water Temps

Back 13

Normal: 140-185*F

Restrictive: 186-211*F

Disabling/Alarm: 212*F

Front 14

Jacket Water Capacity/Type

Back 14

12 Gallons of Power Cool 50/50 pre-blend

Front 15

Engine lube oil pressure below 10 psi at 650 RPM

Back 15

Disabling Casualty

Front 16

Engine lube oil pressure below 31 psi at 2300-2350 RPM

Back 16

Disabling Casualty

Front 17

Reduction gear oil temperature above 193F at 2300-2350 RPM

Back 17

Disabling Casualty

Front 18

Engine coolant temperature between 186F and 211F.

Back 18

Restrictive Casualty

Front 19

Leaks less than 15 drops per minute:
a) Jacket Water
b) Raw Water
c) Lube Oil
d) Hydraulic Fluid
e) Marine Gear Oil

Back 19

Major Discrepancy

Front 20

Any fuel leak (piping/fittings/tank) that drips less than one drop within ten minutes.

Back 20

Major Discrepancy

Front 21

Loose/missing fittings, nuts, bolts, brackets, etc.:*
a) Hardware on the engines used for attaching equipment.
b) Battery terminals loose or corroded.
c) ECM cables loose or disconnected. * For fasteners utilizing nyloc nuts, the bolt must engage and pass through the nylon insert, but not more than five threads.

Back 21

Major Discrepancy

Front 22

Leaks more than 15 drops per minute:
a) Jacket Water
b) Raw Water
c) Lube Oil
d) Hydraulic Fluid
e) Marine Gear Oil

Back 22

Restrictive Casualty

Front 23

Fuel oil dripping* (falling onto a surface which is not hot). One drop within ten (10) minutes

Back 23

Restrictive Casualty

Front 24

Fuel oil dilution 2.5% or above.

Back 24

Disabling Casualty

Front 25

Complete loss of charging system. (i.e. both AuraGens inoperative)

Back 25

Disabling Casualty

Front 26

Complete steering system inoperative.

Back 26

Disabling Casualty

Front 27

Failure of any emergency system:
a) Fuel shut off valves do not fully close

Back 27

Restrictive Casualty

Front 28

Maximum RPM under load (norm 2300) – less than 2200 RPM.

Back 28

Restrictive Casualty

Front 29

CODE 48

Back 29

Low Fuel Oil PSI