Describe The Industrial Welding Process

Improved Essays
Welding
There are 5 main types of welding process commonly used in industrial welding. They are; Gas Metal Arc Welding, oxy acetylene, Gas Tungsten arc welding, flux core, and Shielded metal arc welding. All welding procedures are important and useful for a variety of things.
Welding is the process by which two or more pieces of metal are joined or metal has material added to it to fill a hole. Welding process work by heating the base metal, or the material being on, to a liquid state. They then usually add filler material, in the form of wire or rods/electrodes. The filler material will also melt and mix with the base metal causes an irreversible bond fusing and strengthen the metal as it cools.
The most common process used in industrial

Related Documents

  • Improved Essays

    Iron oxide + Carbon→ Iron + Carbon dioxide 2Fe2O3 + 3C→ 4Fe + 3CO2 Iron oxide is reduced to iron and the carbon is oxidised to carbon dioxide. The blast furnace is so hot that carbon monoxide can also be used to reduce the iron oxide instead of…

    • 1011 Words
    • 5 Pages
    Improved Essays
  • Superior Essays

    Metal Fabrication Essay

    • 1780 Words
    • 7 Pages

    Welding plays a big part in metal fabrication. Welding is the use of various fusion processes to repair or create metal structures by joining metal together. Extreme heat temperatures are used to weld the materials. Generally using open flame, electric arc or laser light. In the 1800’s major breakthroughs in welding were made.…

    • 1780 Words
    • 7 Pages
    Superior Essays
  • Improved Essays

    Titanium Alloy Essay

    • 841 Words
    • 4 Pages

    Like few tens to a few hundreds of briquettes – depending on the ingot size. The VAR process ingot production flow is shown in this flow chart. The primary electrode of titanium is connected to the cathode of the furnace. It is melted by the direct current arc produced between the water cooled copper crucible (which is connected to the anode of the furnace) and primary electrode (which is connected to the anode of the furnace). Molten titanium is solidified in layers in the water cooled copper crucible to form an ingot.…

    • 841 Words
    • 4 Pages
    Improved Essays
  • Great Essays

    Presentation of non-conventional welding procedures applied a. Friction welding Friction welding is a pressure welding procedure, at which the energy necessary for welding is obtained by transforming the friction mechanical energy into heat. [1] Welding process includes the following phases: [1]  driving one of the welding components in rotating, with constant or variable speed and the other one (fixed) pressing on it, with an axial force;  heating the components ends, because of the friction of the two surfaces in contact, under the axial force action (constant or variable in time); the relative components rotation under the axial pressure action is maintained until the temperature necessary to plastic deformation of the components in contact is reached;  pressing the components in order to weld them is realized using an axial force higher than the heating force. Economical factor represents an advantage of friction welding procedure, considered to be more economical than pressure electrical welding, because of the consumption power lower about 22.5 times. Another advantage is considered to be that friction welding procedure allows the welding of materials with different chemical composition, as well as the welding of materials with different melting…

    • 1786 Words
    • 8 Pages
    Great Essays
  • Great Essays

    This type of Corrosion occurs when the two non-similar metals are dipped partially or are immersed in solution or when the metal comes in contact with a liquid which is conducting. A Galvanic cell forms on the surface of metal and Therefore, some part of metal surface acts as anode and other as cathode. The chemical in the environment and humidity acts as an electrolyte. So the Oxidation of anodic part takes place and therefore corrosion product is formed on the surface of the metal between cathode and anode. To understand this theory, let us take a example of corrosion of Iron.…

    • 1390 Words
    • 6 Pages
    Great Essays
  • Improved Essays

    Welding Process

    • 1280 Words
    • 6 Pages

    1.2 Types of welding There are so many types of welding process to weld metal or non-metals are given below. Welding is generally two types: (i) Conventional (ii) Nonconventional 1.2.1. Conventional welding Arc welding (i) Shielded metal arc welding (SMAW), (ii) Gas metal arc welding (GMAW), (iii) Flux cored arc welding (FCAW), (iv)Gas tungsten arc welding (GTAW) or tungsten inert gas (TIG) welding (v) Submerged arc welding (SAW), (vi) Plasma Arc Welding, (vii) Carbon arc welding, (viii) Atomic hydrogen welding, (ix)Arc spot welding, (x)Flux cored arc welding, (xi)Stud arc welding Gas welding (i) Oxy-acetylene welding (ii) Air acetylene welding (iii) Oxy-hydrogen welding (iv) Pressure (v) gas welding Resistance welding (i) Spot welding (ii) Seam welding (iii)…

    • 1280 Words
    • 6 Pages
    Improved Essays
  • Great Essays

    First, the coal is crushed into a fine powder and is blown into the boiler. In the boiler, the coal is burned and the chemical energy is converted into heat energy. So basically, the coal just gets extremely hot while in the boiler. Grinding the coal is necessary because it increases surface area to allow the coal to burn more efficiently with minimal waste and maximizes heat production. Coal also produces ash and exhaust gas when it is burned.…

    • 2608 Words
    • 11 Pages
    Great Essays
  • Improved Essays

    Ethylene Case Study

    • 1030 Words
    • 5 Pages

    Unit 800 consists of a fired heater to preheat the reactants, an isothermal reactor to produce ethylene and acetic acid, a series of heat exchangers to cool the product, and a separation train to distill products to an economically sustainable purity. Due to the complex kinetic expressions for the several reactions taking…

    • 1030 Words
    • 5 Pages
    Improved Essays
  • Superior Essays

    Since then more than 15% of the weld joints are produced by this process. [3] In the manufacturing of a pressure vessels, two different components like the cylindrical shell and the dome structure are casted and then joined by welding. In this process, the arc is submerged under the blanket of flux consisting of silica, manganese oxide or calcium fluoride which is fed into the weld zone through a hopper by a gravity fed controlled nozzle. The thick layer of flux covers the molten metal preventing the spatter and sparks to spread out as a result of which an insulation is formed promoting a deeper penetration of heat into the workpiece making a stronger weld joint. The insulation of the flux also prevents the oxides and hydrides from the atmosphere getting trapped into the molten weld pool.…

    • 1846 Words
    • 8 Pages
    Superior Essays
  • Decent Essays

    Essay On Welding

    • 454 Words
    • 2 Pages

    welding Welding the process to make, unite or fuse two or more pieces of metal as one. Welding uses electrons to heat metal to its boiling point in which it cools and bonds. Welding has been around since the egyptians they used it to make their tools to make the famous pyramids. In 1800 sir humphrey davy made a tool that was battery operated that was made just for welding. Today sir humphreys tool has been modified and made into as we know today as the arc welder.…

    • 454 Words
    • 2 Pages
    Decent Essays