Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
66 Cards in this Set
- Front
- Back
Define a fillet |
Arc tangent to two entities |
|
When trimming, a "solid entity between two points" represents what will be created. |
True |
|
The Dynamic Gnomon is an interactive item used in the graphics window to locate and align a set of axes. |
True |
|
Where do full circles start and end? |
3:00 |
|
In the Xform Rotate function, what is zero position referenced to? |
Relative to horizontal in the active plane. |
|
Select the best answer for the following: What does the Work Offset # in the View Manager do. |
Assigns a work offset number to the associated view. |
|
How many selection points on an axis of the dynamic gnomon can redefine the axis vector? |
3 selection points |
|
Which of the following Trim function buttons is not mutually exclusive? |
Default |
|
In the Xform Rotate function, what is the zero position referenced to? |
At 3:00 in the current construction plane. |
|
How many selection points are along each axis of the dynamic gnomon? |
5 selection points |
|
Which of the following can be used to define a plane? |
2 lines, an arc, a flat surface, 3 points |
|
Arcs may not be created on an extended portion of the selected entity. |
False |
|
Polar Arcs are calculated in a clockwise direction |
False |
|
It is a good idea to copy system views when shifting the Zero to accommodate multiple setups on the CNC machine. |
True |
|
After using the Xform function, what are the original entities called? |
Group |
|
Press F9 to: |
Show/hide the coordinate axes and system origin |
|
When extruding a solid the direction is set by |
B and C |
|
To create a parallel line that is tangent to an arc, click the Tangent button in the Line Parallel ribbon bar, Select the reference line, and then choose the entity you want the parallel line to be tangent to |
True |
|
When you create entities dynamically, they are drawn with a white line. This is called the phantom state. When you click the final position to create the entity, the entity becomes: |
Live |
|
Setting a new active WCS, Cplane, and Tplane in the View Manager tells Mastercam to |
Map the axis to the desired plan as if rotating a part by hand |
|
Ina Top view and plane, vertical is parallel to which axis? |
Y axis |
|
When using the Autocursor to set a Delta Position? |
Hold shift and select a position |
|
To move between buttons and fields in ribbon bars, you can: |
All of the Above |
|
In 2D mode, where is geometry created? |
Parallel to the current Cplane at the current system Z depth |
|
What is term that defines the Color, Line Style, Point Style, Level, Line Width, and Surface Density of an entity? |
Attributes |
|
A hidden entity will remain hidden when a file is saved and re-opened |
False |
|
You can create a full circle by entering 0 for the start angle and 360 for the end angle? |
True |
|
A locked Autocursor override remains in effect until you perform one of the following actions. |
All of the Above |
|
All basic geometry can be created through the Sketcher toolbar. |
True |
|
Which is not a typical task of the View Manager? |
Changing the Gview |
|
Select the best answer to place copies around the selected center point using Solid Circular Pattern. |
All of the Above |
|
Selecting an arrowhead on the dynamic gnomon controls |
Align the axis |
|
In 3D mode, where is geometry created? |
At all of the geometry positions listed above |
|
After using Xform function, what are the new entities called? |
Result |
|
Which of these is not a standard WCS selection? |
None of the above |
|
When you select a chain in the chain manager the large arrow indicates direction and the small arrow inditcates |
The side the tool will travel |
|
Active Reports Setup sheets always include an isometric view relative to the operation's WCS |
True |
|
to create a Setup sheet for tool-path operations, you select the operations and |
Right mouse click, select Setup sheet |
|
The depth of a chain for a Chamfer tool-path should be at the base of the chamfer |
True |
|
where do you set the default chaining direction? |
chaining options |
|
When you chain a contour and it does not chain completely around the part, which of the following is not the possible cause? |
A reversed normal |
|
The FBM Mill parameter " Minimize tool changes" - sorts the tool-paths into subgroups using the following criteria: |
Operation type, tool diameter, sequence, and Restmill overlaps |
|
Activating Microlift on back moves (Cut Parameters) helps evacuate chips more cleanly and reduce tool temperature during mill cut passes. |
True |
|
MasterCam always sets the Incremental Depth value to zero (0.0) in the Linking Parameters page |
False |
|
Which of these is not a tool-path Compensation type? |
Radial |
|
To create a new view in the view manager you must start with either geometry or an existing view. |
False |
|
Chaining a rectangle CW with a cutter comp set to left will cut the inside of the rectangle. |
False |
|
In Tool Manager Default state, the top window contains the tool in the part file. |
True |
|
Name all of the 2D Contour tool-path types: |
2D, 2D chamfer, Ramp, rematching, and Oscillate |
|
Select the item that does not belong in the tool list window in the Tool Manager. |
Assembly Number |
|
You must select a bull nose endmill, ball endmill, or chamfer endmill when creating a chamfer tool-path. |
True |
|
what are the chaining requirements for a 2D high speed Core mill tool-path |
Two closed chains; the outermost chain defines the stock boundary: and the inner most boundary defines the tool-path boundary |
|
Tool-paths used for Engraving typically have what type of cutter comp? |
Off |
|
The Roughing Angle sets the orientation for the roughing passes when you use One Way or Zigzag cutting methods for pocket tool-paths. |
True |
|
which toolpath is a good choice for large holes |
Circle Mill |
|
How do you verify to present a cleaner image? |
Increase the precision |
|
What must be set to import geometry into the WCS orientation |
construction and Tool plane equal to the WCS |
|
which option from the WCS menu allows you to manipulate the gnomon during plane creation? |
Dynamic WCS |
|
which right-click option is used to create a tool? |
Create new tool |
|
which item in the Level manager makes all levels visible? |
All on |
|
When generating an FBM toolpath you must create a new toolpath group |
False |
|
How do you suppress fillets in a solid when there is no history? |
Remove solid fillets |
|
Why is it important to mane toolpath groups logically |
All of the Above |
|
What is the biggest problem problem for creating toolpath on solid models |
Determining the boundaries |
|
What is a primary benefit of importing operations? |
Reuse proven toolpaths |
|
on what page will you find the options for Create operations independent of solid(sreate points) in FBM Drill? |
Setup |