Mastercam 2017 Design Post-Test

Front 1

Which Solid Extrude type should be used to hollow out or slice through a solid?

Back 1

Cut body

Front 2

What happens when you blank an entity?

Back 2

The selected entity is removed from the screen display.

Front 3

You can select multiple closed chains at the same time to extrude into a solid.

Back 3

True

Front 4

When you choose to create a new plane by using From line normal, the geometry you select will be

Back 4

Parallel to the Z axis.

Front 5

You can lock the diameter of a circle to create more than one with the same measurement.

Back 5

True

Front 6

Math calculations can be performed in the Circle Radius or Diameter field.

Back 6

True

Front 7

Solid Extrude requires chains that are planar.

Back 7

True

Front 8

What is the function Shift+click used for?

Back 8

To create geometry relative to an existing point.

Front 9

In the Wireframe tab, Trim/Break Extend function is set to Divide/delete, you select on the section of geometry you want to divide/delete.

Back 9

True

Front 10

What Solid Fillet option allows a fillet to extend along a solid without selecting every edge?

Back 10

Propagate along tangencies.

Front 11

What is the shortcut key to quickly snap the start of an entity to the origin?

Back 11

O.

Front 12

Which tab on the Ribbon bar is selected to fillet a solid?

Back 12

Constant Fillet.

Front 13

To set the active depth to a position on geometry which function or functions do you select?

Back 13

Set to 2D and Z depth to geometry.

Front 14

How do you edit the properties of existing geometry?

Back 14

Analyze Entity.

Front 15

When creating solid bodies, it is a best practice to:

Back 15

Name them.

Front 16

In Solid creation: When extruding a body in both directions, what should you enter for the distance?

Back 16

Exactly what is specified.

Front 17

To organize geometry before creating a new feature, solid, or geometry for a toolpath, you should:

Back 17

Make a new active level.

Front 18

In transform using the Mirror function, what in the following is not allowed to mirror geometry?

Back 18

Spline.