Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
What affects the max and mini amount of defective accepted |
1.lot size 2.cost of testing 3.cost of disabling and reassembling an assembly |
|
What is partial inspection |
Only a part of a lot is taken for testing and is used to see if the lot is accepted or rejected and is also know as acceptance sampling |
|
What is complete inspection |
When entire lot is tested to see if the whole lot is accepted or rejected |
|
What is the risk of complete inspection |
1.expensive 2.time consuming 3.lot size to big |
|
What are the risk of partial inspection |
If 10 percent is taken out for testing while the other 90 percent of a lot is good the lot will still be thrown away as from testing the lot was full of rejects |
|
What do the 3 levels of aql(acceptance quality level) mean |
Level1.inexpensive products Level2.normal products Level 3.expensive products |
|
How do you do aql |
1.Take the lot size and the level (if the level is not given assume its level 2) and find out the letter 2.use the letter and the percent and find the number of defects to accept or reject the lot |