• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/6

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

6 Cards in this Set

  • Front
  • Back
Question: 1
What should you do if the fan in the power supply stops working?
A. Replace the fan.
B. Replace the case.
C. Lubricate the fan.
D. Replace the bearing
E. Replace the power supply.
e. replace the power supply
What does an error during POST on a PC mean? (Choose two)
A. BIOS requires resetting.
B. Hardware failure.
C. HIMEM.SYS is missing or faulty.
D. The drivers for the device are incorrect.
E. The Windows file system is generating an error.
a. bios requires resetting
b. hardware failure.
You are a technician at Braindumps. Your newly appointed Braindumps trainee wants to know
which are the correct combinations of COM ports and IRQs on a PC.
What would your reply be? (Choose two)
A. COM1 and COM2, IRQ5
B. COM3 and COM4, IRQ2
C. COM1 and COM3, IRQ4
D. COM1 and COM3, IRQ3
E. COM2 and COM4, IRQ3
c. Com1 and Com3 , IRQ 4

e. com2 and com4, IRQ 3
You are the technician at Braindumps. You want to configure the hard disk in the BIOS. Where
does BIOS save this setting?
A. CPU
B. CMOS
C. Memory
D. Hard Drive
b cmos
You are a trainee at Braindumps. You are told to connect a bootable hard drive to a PC.
Which connector on the IDE cable should you use?
A. The first connector of the primary IDE controller.
B. The second connector of the primary IDE controller.
C. The third connector of the primary IDE controller.
D. Either the first or the second connector of the primary IDE con
d
You are a technician at Braindumps. Your newly appointed Braindumps trainee wants to know
how to identify an ATA/33 IDE cable from an ATA/66 IDE cable.
What would your reply be?
A. Cable color
B. Cable pin out
C. Twists in the cable
D. Number of wires
d