Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
33 Cards in this Set
- Front
- Back
In your own words, What are your responsibilities as a team leader? |
In charge of evolution, reads checklist to team members and insures each step is properly completed before moving onto the next step |
|
Before loading a hellfire, Place the launcher holdback release handle to what position? |
Unlatched |
|
Once R&C Checks are complete and weapons are loaded how long can they remain loaded without doing another check? |
72 hours |
|
How soon prior to shooting live audience to Release and control checks need to be performed? |
Within 24 hours |
|
Can you perform released control checks with launchers installed or ordinance |
Release and controls may be performed with m299 loaded if all bru 65 Cartridges are removed |
|
What instruction governs the ordnance qualification program? |
8023.24C |
|
How long is your Ordinance certification valid for? |
It’s valid until the last day of the 12 month after being certified or until decertified or revoked by proper authority |
|
What are some factors taken into consideration when suspending or revoking certification |
Explosive mishaps, reckless operation of support equipment, disregard/negligence of safety, substance abuse |
|
What is the number one priority of every single ordnance evolution? |
Safety |
|
What four things should be accomplished prior to beginning an ordnance evolution? |
Aircraft grounded,aircraft chocked,power removed and air craft prep |
|
How many sections in the agm 114 and what are they |
Seeker Warhead Guidance Propulsion Control |
|
It’s hard refueling authorize with ordnance loaded? |
It’s only permitted with commanding officer approval |
|
What are some of the different characteristics between the mk-25 and Mk-58 |
Mk25 yellow flame 13.5-18.5 minutes Mk-58 yellow flame 40-60min |
|
How many sections are there to the LWS000. And what are they |
Introduction, description, configuration data, release and control system checks, and common procedures |
|
What are the danger areas associated with the aircraft |
Engine intake, engine exhaust, flight controls, main rotor blades, tell rotor blades, chaff/flare dispensers, fwd/aft of loaded ordnance |
|
What is the purpose of the jettison system? |
To jettison either all stores or selected stores and expendable countermeasures in the event of an emergency |
|
What size suspension does the bru 65 use and with is the safe working load ? |
-14 inches m/ 1000 lbs |
|
What is the approximate weight length and diameter of a AGM114 missile what |
98.5 lbs 64/7 inches |
|
What test set is used to perform jettison checks ? |
AWM102
|
|
What test set is used to perform release and control checks ? Why |
AWM103 Verifies the aircraft weapon release and control systems are properly functionable |
|
What test set is used to perform ALE47 dispenser checks ? |
ALM290 |
|
What cads and how many are used in the bru65 ? |
CCU107 We use two in a bru |
|
What do you torque the BRU65 store chocking control to after loading stores ? |
200 in. lbs |
|
If it flare tube exhibits any sign of visible damage or has been dropped, what should you do? |
Do not handle or load. Notify EOD for disposal immediately |
|
What part of the chaff/flare bucket allows you to set the configuration of what is loaded? |
MAG ID switches S1 and S2 |
|
What is the arm/de-arm publications |
LWS 680 |
|
What is the standard loading procedures publication? |
LWS 000 |
|
What is the hellfire load procedure publication |
LWS 620 |
|
What is the gau 17 gun system check publication? |
LWS 230 |
|
What does WARNING mean? |
A procedure a practice that if not followed could result in personal injury or loss of life |
|
What does NOTE mean? |
An operating procedure Or condition which is essential to highlight |
|
What does CAUTION mean? |
An operating procedure or practice which if not strictly observed could result to damage or destruction of equipment |
|
What is the lws-720 |
Ale-47 |