Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
This module identified several categories of commercial vehicles that are subject to inspection identify any five with a commercial vehicle categories |
School bus Commercial bus Commercial Bus Trailers Dollies jeeps and boosters Trucks and truck tractors |
|
Identify two major regulations developed by the Alberta government that form of the basis of commercial vehicle inspection program in Alberta |
Commercial vehicle maintenance standard regulation Commercial vehicle inspection regulation |
|
The commercial vehicle inspection program recognizes that certain categories of vehicles are exempt from inspection identify these categories |
Farmers and some forestry |
|
Identify the name of the publication that is used as a guide during a commercial inspection process |
An inspection method and standard manual is the guide used in the inspection process |
|
The publication mentioned in question four contains certain information that is used during an inspection process, identify the five information categories that are included in this manual |
General area/systems requiring inspection Conditions under which Inspections must’ve occur specific components requiring inspection General reasons to reject/faila component under test Specific criteria that causes a vehicle to be placed out of service |
|
Identify the two things in inspection, technician must do in the event that a vehicle fails our regularly scheduled inspection |
Refuse to issue an inspection certificate, and decal for that vehicle Notify the person who presented the vehicle for the inspection of the failure of the vehicle to pass the inspection |
|
The contents of the inspection, method and standard manual are permanently fixed in the manual. No changes are allowed in order to maintain the consistency of the inspection process |
False amendments are provided to update the inspection, method and standards manual as required by changes in the industry an introduction of new technology |
|
In order to be license as a commercial vehicle inspection Station a service shop must meet certain qualifications identify those qualifications |
In order to qualify for inspection stations license service shop must have sufficient internal hard surface floor space to accommodate at least one vehicle of the type the station is applying for Must also be equipped with handtools and headlight, aiming equipment, the means to accurately measure brake drum rotors, brake linings and pads, a hoister jack suitable for the weight of the commercial vehicles, jackstands tire pressure in tread depth gauges, and the means to accurately measure FreePlay over wearing in steering or suspension Shopping inspection equipment must be maintained in a clean and safe condition. All inspection in Equipment gauges in measuring devices must be in calibration at all times. |
|
Identify two categories of inspection technician license that were discussed in this module |
General inspection technician license Trailer inspection technician license |
|
An inspection certificate and inspection decal must be renewed annually |
True |