• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/25

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

25 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)

Where is salt water admitted into the ship and why?

At the bottom of the ship (hull) because this is where there is natural pressure for the salt water to enter the ship and because there is less pollution deeper than surface water


Through the sea chest

How is fouling and blockage of the pump prevented in sea water systems?

The sea chest and strainer stops particles and objects from going through the pipes before the salt water gets to the SW pump

What are isolating valves

Isolating valves are valves that are used to isolate parts in systems so they can be taken apart and maintained easier than keeping the system together

Before any system is broken for maintenance or repair the section concerned is to be tagged out in accordance with?

NZBR 2020, RNZN fleet technical hazard management

List the above tag out procedures

The user of the equipment is told.


Anyone who might be affected by the equipment getting taken out/ being put under maintenance is to be told.


All isolation points are to be identified

In your head put together a basic SW cooling system

:)

Where on a ship are AFFF systems most commonly found?

machine space

List the types of AFFF outlets and where they are applied

Bilge sprinklers-Fwd and aft


Overhead sprinklers-fwd and aft


Oscillating monitors-flight deck (there are 2, one port and one stbd)

List the safety rules when using foam inlet tubes

Connect pick-up spill to the FB5X when in use


Use number 2 size hose when using the FB5X


Make sure there’s enough foam containers available


Prove foam (test the foam)

FB5X

Why do ships need desalination plants?

So reverse osmosis can take place and fresh water can be made when needed

R.O

Fresh water diagram

Back (Definition)

Spongebob

What must be done before embarking fresh water in overseas ports

Flush through the hydrant hose


Get medics to test water

Hail hydra

List the use for fresh water other than domestic use

Machinery water systems


Emergency fresh water


Medical fresh water


Machinery cleaning

M-E-M

What is a drain tank used for

All excess water from overflow and fresh water relief

What system is used to empty the drain tank?

Bilge water system

Name the general sub systems associated with the fuel system

Transfer system


Overflow tank


Filling system

T-O-F

What is the AVCAT system used for?

Separation of water and fuel


Replenishment of AVCAT storage (then)


Transfer of AVCAT from the storage tank to the service tank (tank that is going to be used)


Fueling of the helicopter from the service tank

Fueling of heli process

Hazards associated with fuel

Fire


Toxic vapours


Explosive vapour


Degreasing effect on skin


Growth and skin cancer risks

What are the major considerations when estimating a ships range

Amount of fuel


Efficiency of the motor(s)/system

Before fueling you are detailed to set up the point of containment of spills. What do you need to do?

Scuppers are blocked


Sand snakes around decks


Drip trays under connectors


Mops on standby

What do you need to do before fueling (4 marks)

What does the word forced mean when applied to oil systems?

Oil is pumped to create flow

Where is the lube oil stored for machinery such as provision cooling plants?

Oil storage tanks

Name components of a gearbox lube oil system

Duplex filters


Lube oil pumps


Lube oil cooler


Gear box

Think of systems and what are in them


D-L-L-G

What are the steps to minimising the risk of fire in relation to oil systems?

Prevent vapour forming


Repair leaks


Remove sources of ignition


Insulate surfaces


Check bilges


Protect pipe flanges

Prevent va


Repair 🥬


Remove sources of i________


Insulate sur_____


Ch___ bil___


Protect pipe fl_____

When working with fuel and oil what should you do with regards to personal protection?

Raise the bravo flag


Wear goggles and respirators


Wear aprons


Wear pvc coveralls


Wear gloves