Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
18 Cards in this Set
- Front
- Back
|
FO preflight flow |
Audio control panel- set Oxygen- test and set Sun visors and roller shades- stowed Seat- adjust Rudder pedals- adjust Seat belt and harness- adjust EFB- as required |
|
|
FO before start trigger and flow |
Trigger- after fueling is complete and approx 10 prior to gate dep AML and flight forms- check |
|
|
FO before pushback trigger and flow |
Trigger- all external doors closed and cabin ready and guideperson ready for pushback reports are received FD door- closed and secured Probe heat- on Hydraulic panel- set Doors/ windows- closed/ locked Anti collision light- on |
|
|
After start- planned single engine taxi |
After first engine Stabilized- •Anti ice switches- verify •Air conditioning and bleeds- set - Flaps - (CA will call for flaps) set After second engine Stabilized- •Anti ice switches- verify •Air conditioning and bleeds- set - Recall check - Flight control check |
|
|
After start- planned two engine taxi |
After first engine Stabilized- •Anti ice switches- verify •Air conditioning and bleeds- set
After second engine Stabilized- •Anti ice switches- verify •Air conditioning and bleeds- set - Flaps- CA calls for "Flaps _____" - Recall check - Flight control check |
|
|
Before takeoff |
After load closeout reviewed, both engines running and flaps set for takeoff- •Stab trim- set •Flaps- set and green light •Takeoff data and bugs- check •Air cond and bleeds- auto and set •T/o config switch(if installed)- press PA- "Flight attendants prepare for takeoff" (no less than 2 prior to t/o) |
|
|
Before taking the runway |
•MCP/ND- check •Exterior lights- set •Min t/o fuel- verify |
|
|
Cleared onto takeoff runway |
•Wing lights- on |
|
|
Cleared for takeoff |
•Position light- strobe and steady |
|
|
After takeoff/ climb |
PF calls "Flaps up, after takeoff checklist" •Gear- off or up •Flaps- up/ no lights •Autobrake- off •Air conditioning, bleeds, and press- check •Anti ice- as required •APU- as required |
|
|
Climbing through 10,000 AFL |
PF- Sterile flight deck- chime PM- CPDLC log on- verify |
|
|
Transition Alt (climbing) |
PFD/ stby altimeters- STD
PM- "transition, standard" PF- "standard "
•Climbing through 18k MSL- wing lights- off |
|
|
Enroute |
At top of climb and PF call out "cruise checklist" PM- •Center fuel pumps- configure(as applicable) •Thrust mode display- CLB |
|
|
Transition level (descending) |
PFD/STBY alt- set PM- "transition, XX.XX" PF- "XX.XX" |
|
|
FL180 (descending) |
Wing light- On PF- Anti ice- as required Terrain display- select Autobrake- as required FMS- set Radios and displays- set PM- Exterior lights- set Fasten belt switch- on Anti ice- as required Pressurization- check Recall- checked Terrain display- select Radios and displays- set |
|
|
10,000 afl (descending) |
PF- Sterile flightdeck- chime PM- Flight attendants- notified |
|
|
After landing |
•Flaps- up/ no lights •Stab trim- 5 units •Autobrake- off •Flight directors- off •WX radar- off •Exterior lights- as required •Anti ice switches- as required 2 minutes prior to gate arrival- •APU- start |
|
|
Shutdown |
•Engine start levers- cutoff •Transponder- stby •Anti collision light- off •Air conditioning and bleeds- set •Window heat- off •Probe heat- auto •Anti ice- off •Elec Hyd pumps- off •Emer exit lights- off •Engine start switches- auto •Quantities- check •Arrival report- send •Flight deck lights- as required |
