Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
30 Cards in this Set
- Front
- Back
|
NORMALLY, ELECTRICAL FUZES ARE CHRAGED AFTER WHICH OF THE FOLLOWING SITUATIONS OCCUR
|
THE BOMB HAS BEEN RELEASED FROM THE RACK OR SHACKLE
|
|
|
WHAT KIND OF FUZE IS THE M904
|
THE M904 IS A DETONATOR-SAFE, MECHANICAL IMPACT NOSE-FUZE
|
|
|
WHAT BOMB SERIES IS THE M904 FUZE USED WITH
|
THE M904 SERIES FUZE IS USED WITH MK 80 SERIES BOMBS
|
|
|
THE M904 FUZE HAS ? ARMING DELAYS, WHICH YOU CAN SET FOR 2 TO 18 SECONDS IN ? INCREMENTS; THERE ARE ANY COMBINATION OF ? FUNCTIONING DELAYS FROM INSTANTANEOUS TO 250 MILLISECONDS
|
THE M904 FUZE HAS NINE ARMING DELAYS, WHICH YOU CAN SET FOR 2 TO 18 SECONDS IN 2-SECOND INCREMENTS; THERE ARE ANY COMBINATION OF SIX FUNCTIONING DELAYS FROM INSTANTANEOUS TO 250 MILLISECONDS
|
|
|
THE M904 IS THERMALLY PROTECTED. WHY IS THIS IMPORTANT?
|
IT IS IMPORTANT FOR THE M904 TO BE THERMALLY PROTECTED BECAUSE IT INCREASES THE COOK-OFF TIME OF BOMBS SUBJECTED TO INTENSE HEAT OR FLAME
|
|
|
DESCRIBE THE MEANS YOU USE TO CHECK THE CONDITION OF THE M904 FUZE
|
THERE ARE THREE CONDITIONS OF THE M904 FUZE SAFE,PARTIALLY-ARMED,AND FULLY-ARMED. YOU CAN CHECK FOR THESE CONDITIONS BY LOOKING IN THE TWO OBSERVATION WINDOWS IN THE FUZE BODY.
|
|
|
IF YOU CAN'T TELL IF A FUZE IS SAFE , YOU SHOULD NOTIFY ?
|
IF YOU CAN'T TELL IF A FUZE IS SAFE, YOU SHOULD NOTIFY EXPLOSIVE ORDNANCE DISPOSAL
(EOD) PERSONAL |
|
|
THE M904 ARMS AND FUNCTIONS BY ?
|
THE M904 ARMS AND FUNCTIONS BY ROTATION OF ARMING VANES AND ALIGMENT OF INTERNAL COMPONENTS
|
|
|
WHAT BOMB IS USED WITH THE MK 339 MECHANICAL TIME FUZE?
|
THE MK 20 IS USED WITH THE MK339 MECHANICAL TIME FUZE
|
|
|
THE PRIMARY AND OPTION DELAY OF THE MK 339 FUZE IS SET AT THE FACTORY. WHAT MEANS CAN BE USED TO CHANGE THE SETTINGS FOR THE TACTICAL REQUIREMENTS?
|
THE PRIMARY AND OPTION DELAYS CAN BE CHANGED BY ADJUSTING THE PRIMARY AND OPTION TIME-SETTING DIALS.
|
|
|
HOW CAN YOU TELL IF THE MK 339 HAS SHIFTED FROM THE PRIMARY TO THE OPTION DELAY
|
YOU CAN TELL IF THE FUZE HAS SHIFTED FROM THE PRIMARY TO THE OPTION DELAY BY CHECKING THE TIME SETTING OBSERVATION WINDOW OF THE FUZE.
|
|
|
DESCRIBE WHAT YOU WILL SEE IN THE OBSERVATION WINDOW OF A MK 339 FUZE FOR THE CONDITIONS LISTED BELOW:
SAFE ARMED |
SAFE: GREEN FOIL IS INTACT
ARMED: GREEN FOIL IS PIERCED BY THE INDICATOR PIN |
|
|
ALL ELECTRIC CAPABILITY FOR THE MK 80 WITH EITHER CONICAL OR RETARDING FINS,THERMALLY PROTECTED BOMBS,AND LASER-GUIDED BOMBS IS PROVIDED BY ?
|
ALL ELECTRIC CAPABILITY FOR MK 80 WITH EITHER CONICAL OR RETARDING FINS, THERMALLY PROTECTED BOMBS, AND LASER-GUIED BOMBS IS PROVIDED BY THE MK 376 ELECTRIC BOMB FUZE
|
|
|
NO UNUSUAL RADHAZ PRECATIONS ARE TAKEN WHEN USING THE MK 376 BECAUSE IT IS CLASSIFIED AS ?
|
NO UNUSUAL RADHAZ PRECATIONS ARE TAKEN WHEN USING THE MK 376 FUZE BECAUSE IT IS CLASSIFIED AS HERO SAFE
|
|
|
NAME THE ELECTRIC FUZES THAT ARE USED FOR RETARED DELIVERY OF THE MK 80 SERIES BOMB
|
THE MK 376 ELECTRIC FUZE AND THE FMU 139 ARE USED FOR RETARDED DELIVERY OF THE MK 80 SERIES BOMB
|
|
|
LIST THE FUNCTIONS OF THE MK 31 SAFETY DEVICE
|
THE FUNCTIONS OF THE MK 31 SAFETY DEVICE ARE TO ADAPT THE FUZE TO THE FUZE WELL OF THE BOMB,MECHANICALLY SAFE THE FUZE, AND TO UNLOCK THE TIMER-DECELEROMETER
|
|
|
WHAT IS THE PURPOSE OF THE MK 122 MOD 0 ARMING SAFETY SWITCH
(ASS) |
THE MK 122 MOD 0 ARMING SAFETY SWITCH IS USED TO OPEN A CIRCUIT AND PROVIDE A RADHAZ SHILD TO PREVENT ELECTROMAGNETIC RADITION FROM ENTERING THE FUZE CIRCUITS
|
|
|
WHAT IS THE PURPOSE OF THE MK43 MOD 0 TARGET-DETECTING DEVICE?
|
THE MK 43 MOD 0 TARGET-DETECTING DEVICE IS USED TO PROVIDE AIRBURST CAPABILITY FOR ELECTRICALLY FUZED MK 80 BOMBS
|
|
|
WHAT IS USED TO POWER THE INTERNAL CIRCUITRY OF THE TDD?
(TARGET DECTECTING DEVICE) |
A THERMAL BATTERY, INITIATED BY A PLUS 300 VOLTS DC OR STRICKER ROD, IS USED TO POWER THE INTERNAL CIRCUITRY OF THE (TDD) TARGET DECTECTING DEVICE
|
|
|
HOW MANY MK 82 BOMBS ARE ON A LOADED PALLET?
|
SIX MK 82 BOMBS ARE ON A LOADED PALLET
|
|
|
HOW MANY MK 83 BOMBS ARE ON A LOADED PALLET?
|
THREE MK 83 BOMBS ARE ON A LOADED PALLET
|
|
|
HOW MANY MK 84 BOMBS ARE ON A LOADED PALLET?
|
TWO MK 84 BOMBS ARE ON A LOADED PALLET
|
|
|
HOW MUCH DOES THE MK 81 WEIGH
CONICAL RETARD |
CONICAL: 260LB.
RETARD: 305LB. |
|
|
WHAT IS THE LENGTH OF THE MK 81
LENGHT: DIAMETER: SUSPENSION PROVISION: |
LENGTH: 76 IN.
DIAMETER: 9 IN. SUSPENSION PROVISION: 14 IN. |
|
|
HOW MUCH DOES THE MK 82 WEIGH
CONICAL: RETARD: LENGTH: DIAMETER: SUSPENSION PROVISIONS: |
MK 82 WEIGH
CONICAL: 531LB. RETARD: 565LB. LENGTH: 90 IN. DIAMETER: 11 IN. SUSPENSION PROVISIONS: 14 IN. |
|
|
HOW MUCH DOES MK 83 WEIGH
CONICAL: RETARD: LENGTH: DIAMETER: SUSPENSION PROVISIONS: |
THE MK 83 WEIGHS
CONICAL:985LB. RETARD:1105LB. LENGTH:119 IN. DIAMETER: 14 IN. SUSPENSION PROVISIONS:14 IN. |
|
|
HOW MUCH DOES MK 84 WEIGH
CONICAL: RETARD: LENGTH: DIAMETER: SUSPENSION PROVISIONS: |
THE MK 84 WEIGHS
CONICAL:1970 LB. RETARD: N/A LENGTH:154 IN DIAMETER: 18 IN. SUSPENSION PROVISIONS: 30 IN. |
|
|
THE MK 15 AND MODS SNAKE-EYE FIN ASSEMBLY IS USED WITH WHAT 500 POUND LDGP BOMB
|
THE MK 15 AND MODS SNAKE-EYE FIN ASSEMBLY IS USED WITH THE 500 POUND MK 82 BOMBS.
|
|
|
MAU-91A/B FIN ASSEMBLY IS A RETARDED TAIL FIN USED WITH WHAT 1,000 POUND LDGP BOMB IN EITHER RETARDED OR UNRETARDED POSITION.
|
THE MAU-91A/B FIN ASSEMBLY IS A RETARDED TAIL FIN USED WITH THE 1,000 POUND LDGP BOMB MK 83 AND MODS IN EITHER THE RETARDED OR UNRETARDED POSITION
|
|
|
THE BSU-85/B AIR INFLATABLE RETARDER ATTACHES TO WHAT GENERAL PURPOSE BOMB
|
THE BSU-85 AIR INFLATABLE RETARDED ATTACHES TO THE MK 83 GENERAL PURPOSE BOMB
|
