Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
100 Cards in this Set
- Front
- Back
The air force TO numbering system is explained in detail in TO?
|
00-5-18
|
|
The first group of characters in Air force TO number 33D7-10-1 identifies the?
|
equipment's major system
|
|
The fourth group of characters in Air force TO number 1B-1B-2-6 identifies the?
|
section of a sectionalized TO
|
|
The JG in Air force TO number 1C-141B-2-9JG-10 indicates the?
|
functional indicator of the TO
|
|
In the Air force TO system, what TO lisits all TO indexes?
|
0-1-CD-1
|
|
In the Air force TO system, what index TO contains a cross-reference lisiting of data code numbers assigned to active TCTOs?
|
0-4-2
|
|
What type of air force TO do you use to locate all of the TOs pertaning to a certain type of equipment?
|
List of applicable publications
|
|
Air force technical manuals that contain data for the operation and servicing of aircraft equipment are called?
|
other equipment TOs
|
|
Publications that contain instructions for use of equipment, in addition to data contained in other mauals, are identified as?
|
supplemental manuals
|
|
In the Air Forcwe, COTS technical manuals are normally identified by an?
|
assigned technical order number
|
|
What Air force technical order is not a type of TCTO?
|
emergency action
|
|
What type of TCTO is used to correct conditions that could result in fatal or serious injury?
|
Immediate
|
|
What types of TCTO can be identified by red Xs or circled red Xs, respectively, alternately spaced around the border?
|
Immediate and urgent
|
|
The TO that lists all Air force MPTO is TO
|
0-1-02
|
|
What type of number identifies a preliminary TO?
|
sequential copy number
|
|
Where are change pages inserted in existing TOs?
|
In place of the page of the same number?
|
|
The authorized types of TO supplements are?
|
routine, saftey, and operational
|
|
Which statement best describes TOPS?
|
TOPS can be issued when the time factor prevents issuing a standered change.
|
|
In a basic TO, how are the pages of an appendix filed?
|
after the last page of the TO
|
|
TO revisions?
|
replace the original TO, including all changes and appendices
|
|
What is used to submit recommendations for TO improvements?
|
AFTO form 22
|
|
The air force TO that gives detailed instrustions for preparing and submitting an AFTO form 22 is?
|
00-5-1
|
|
The types of TO improvement reports are?
|
emergency, urgent, and routine
|
|
What does the -003 in S/S/SN 34-11-10-003 identify?
|
SRU ID
|
|
When the fifth element of a S/S/SN is -3, the type of component procedure indicated is?
|
installation
|
|
What does the alpha code in reference designator 3231FC01 identify?
|
Component type
|
|
An OMMS general system manual provides?
|
fault descriptions and fault isolation procedures.
|
|
An OMMS job guide manual includes?
|
functional maintenance procedures
|
|
In the OMMS fault guide, what type of procedures is component adjustment/alignment?
|
Functional maintance
|
|
An OMMS fault reporting manual provides?
|
a means of conveying fault information
|
|
In fault code 32-41-19-001 -2, the -001 identifies a faulty?
|
SRU
|
|
Section I of the IPB provides information on use of codes and designations found in the TO and?
|
a list of related TOs
|
|
The introduction to section I of the IPB provides the user the capability of cross-referencing?
|
part numbers and figures
|
|
What column of section II of the IPB contains the letters NAS?
|
part number
|
|
Section IV of the IPB provides information for cross-referencing?
|
figure, index number, and part number
|
|
The data system used to assign and control computer program identification numbers is the?
|
ACPINS
|
|
The ACPINS provides a standardized system that does not?
|
develop software
|
|
What is not a responsibilty of the CPIN system management office?
|
Foreign military sales development
|
|
USAF customers must establish CPIN requirments through?
|
TO distribution officers
|
|
Which ACPINS major function is used to deny unauthorized requests?
|
Distribution
|
|
How many separate components may a CPIN have?
|
Three
|
|
A CPIN is composed of how many identifier fields?
|
Four
|
|
In the CPIN identifier, the first field consists of?
|
category and major function codes
|
|
There are how many general types of ACPINS compendiums?
|
Five
|
|
An ACPINS cross-reference compendium contains?
|
quick references for research aids
|
|
The Air Force instruction that governes the current wing organization and operation is
|
21-101
|
|
What factor gives air force wings, squadrons,and units the capability of fighting from main bases or bare bones forward operating locations at any level of combat?
|
decentralization
|
|
Promoting unit self-sufficienty through the effective use of maintenance resources is the responsibily of the?
|
maintenance group commander
|
|
Monitoring and supporting the flight line maintenance effort is the responsibility of the?
|
maintenance operations center
|
|
What is a responsibility of the maintenance operations center?
|
notify appropriate agencies of sever weather warnings
|
|
The MXG exists to?
|
creat and support the sortie-producing OG
|
|
Whose primary role is it to increase reliability and maintainability of aircraft and support equipment?
|
QA
|
|
The QAP is an assessment system used to?
|
determine aircraft and equipment condition,and personnel proficiency
|
|
What flight in the MXS supports the field assistance support team for calibration?
|
TMDE
|
|
What are AF policy directives?
|
Orders of the secrectary of the Air Force to initiate, govern, or regulate actions of conduct by AF activities at any level.
|
|
What publication contains broad, enduring guidance for preparing and employing AF resources?
|
AF doctrine documents
|
|
Statements of the office of the secretary of the air force and HQ USAF used to initate, gover, or regulate actions are called?
|
AF policy directives
|
|
What documents consist of procedures that usually contain examples for performing standard tasks?
|
AF amnuals
|
|
Informational publications that include procedures for implementing AF policies are called?
|
pamphlets
|
|
Informational publications that are compilations of systematically arranged information are called?
|
directories
|
|
Who uses MDC system information for validating manpower requirements?
|
HQ USAF
|
|
Which type of MDC system data is not used at base level?
|
analysis of NRTS actions
|
|
What is the primary source of information for equipment configuration status at base, command, and depot levels?
|
MDC system
|
|
The REMIS is designed to provide information to support AF?
|
equipment maintenance program
|
|
The MDC system data element used to tie together all maintenance actions on specific job is the?
|
JCN
|
|
The first five digits of a JCN indicate the?
|
year and julian date
|
|
A work center that contributes labor towards a maintenance requirement is called the?
|
performing work center
|
|
What MDC system data element is published in manuals and REMIS tables for each weapon and support system?
|
WUC
|
|
What form is used for MDC when the IMDS is not available?
|
AFTO form 349
|
|
The number entered in the TAG NUMBER block of an AFTO form 349 comes from?
|
the AFTO form 350
|
|
Where do you find the code to enter in the TYPE MAINT block of an AFTO form 349?
|
In the system WUC manual
|
|
What is entered in column C of an AFTO form 349 to document a TCTO?
|
The first five characters of the TCTO data code or command-assigned data code
|
|
The entry in the CAT LAB block on an AFTO form 349 indicates?
|
type of man-hour expenditure
|
|
AN X placed in the SCH CODE block of an AFTO form 349 indicates?
|
the computer must calculate the next calibration or maintenance due date
|
|
Which form provides an interface between on- and off-equipment maintenance documentation, and serves as an identification and status tag?
|
AFTO 350
|
|
What AFTO form is used as an accountability document for items managed under the DIFM program?
|
350
|
|
Dates entered on an AFTO form 350 that pertain to repair cycle times are used?
|
as an aid in determining spares requirments
|
|
What is entered in block 15 of an AFTOform 350 if an item is not reparable?
|
The letters NRTS and the not repairable this station code
|
|
Who can give authorization for an aircraft to be flown while under a red X condition?
|
NO ONE
|
|
The symbol you enter on inspection forms when an urgent-action TCTO is received is a?
|
red diagonal
|
|
The IMDS is a?
|
base-level computer system used for maintenance management
|
|
Correcting erroneous data in the IMDS is a function of?
|
database management
|
|
The IMDS is event oriented and user friendly, which means it?
|
checks keyboard entries for compatibilty
|
|
The primary purpose of the IMDS screen 380 is to?
|
provide an up-to-date list of all open JCN
|
|
What IMDS screen displays a maintenance snapshot inquiry?
|
122
|
|
What is not a function of the GO81 automated Maintenance Information System?
|
Personnel leave scheduling
|
|
Of the four types of programs used in the GO81 Automated Maintenance Information System, which is considered to be the heart of the system?
|
Data input
|
|
Users of the GO81 Automated Maintenance Information System know they are logged out when they see on the computer screen the word?
|
MOBILITY
|
|
Supply discipline is best described as?
|
extra consideration to get the most from available resources
|
|
Who is accountable for equipment items?
|
Supply personnel and equipment custodians
|
|
What supply printout provides the user a list of all parts ordered, but not received?
|
Due-out validation listing
|
|
What type of property responsibility is applicable when a sergeant takes possession of a box that fell off an AF supply truck?
|
Custodial
|
|
What type of property responsibility requiresthat directives and instructions be issued?
|
Command
|
|
One way you can be relieved of property responsibility is to?
|
turn the property in to supply
|
|
When a person responsible for property is transferred and the property remains with the organization property rersponsinility?
|
stays in the organization
|
|
Unit nonexpendable equipment authorizations are based on?
|
unit mission and number of personnel authorized
|
|
The on-hand quantity of bench stock iteams does not normally exceed?
|
60 days
|
|
Material deficiency reporting procedures are found in Air Force TO?
|
00-35D-54
|
|
The originator sends a draft DR for screening to?
|
the screening point
|
|
What type of DR requires submission by message within three workdays after the discorery of the deficiency?
|
Category of the deficiency
|