Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
Category: Administration & Troubleshooting
You notice that you are no longer receiving volume statistics from the Windows servers you are monitoring. None of them are shown as down on the Orion Web Console. You run a packet trace and you can verify that the requests are making it to the servers. Everything was fine yesterday. What is the most likely cause of this issue?
A. Issues with firewall rules B. Windows services are stalled C. WMI version conflict D. Windows credentials stored in NPM are expired |
Windows credentials stored in NPM are expired |
|
|
|
Category: Administration & Troubleshooting
You are required to report on hourly average response time of the last 60 days. How should you configure your data collection and summarization parameters to meet these requirements without unnecessarily using database size? A. Collect response time data every hour, summarize hourly data into daily data after 30 days B. Collect response time data every hour, summarize hourly data into daily data after 60 days C. Summarize detailed data into hourly data after 60 days, summarize hourly data into daily data after 90 days D. Summarize detailed data into hourly data after 30 days, summarize hourly data into daily data after 60 days
|
Summarize detailed data into hourly data after 30 days, summarize hourly data into daily data after 60 days |
|
|
|
Category: Agents
You deployed Orion agents on several Windows and Linux servers in your environment. Which port do you need to open on your network to ensure that secure, agent-initiated communication from Windows and Linux agents can get through?
A. 17790 B. 17778 C. 17791 D. 17777 |
17778 |
|
|
|
Category: Agents
You need to deploy the Orion agent software en masse via Active Directory Group Policy. You've already created the Group Policy but you need the MST file. What's the quickest way to get the MST file? A. Download it from https://support.solarwinds.com B.Find the download link in THWACK C. From the Settings pages of the Orion Web Console D. From the SolarWinds installation folder |
From the Settings pages of the Orion Web Console |
|
|
|
Category: Alerting
You receive a number of alerts on high traffic utilization from several interfaces. When you view the Orion Web Console, you find that traffic utilization has returned within normal ranges. Traffic utilization spikes every now and then and you don't usually consider it a problem. How should you modify the alert definitions so that it fires only when high utilization is sustained for 10 minutes or more?
A. The polling frequency on the interfaces should be longer than 10 minutes B. The polling frequency on the interfaces should be shorter than 10 minutes C. Configure the alert to trigger only when traffic utilization is sustained for 10 minutes D. Configure the alert to reset if traffic utilization is sustained for 10 minutes |
Configure the alert to trigger only when traffic utilization is sustained for 10 minutes |
|
|
|
Category: Alerting You are creating an alert for a Universal Device Poller (UnDP). Which of the following trigger condition helps you target the custom poller you want? A. A trigger condition where the custom poller MIB is equal to the MIB used in your UnDP B. A trigger condition where the custom poller Unique Name is equal to the name of your UnDP C. A trigger condition where the custom poller enabled is equal to true D. A trigger condition where the custom poller SNMP get type is equal to GetNext |
A trigger condition where the custom poller Unique Name is equal to the name of your UnDP |
|
|
|
Category: Capacity Planning
You want to change the calculation method for calculating the capacity forecast for all monitored interfaces. Where do you go to change this?
A. Orion Thresholds B. NPM Thresholds C. Web Console Settings D. Manage Alerts |
NPM Thresholds |
|
|
|
Category: Capacity Planning You want to avoid reaching a certain usage level on a number of critical devices. Which forecast calculation method should you use on these devices? A. Automatic calculation B. Manual Calculation C. Peak Calculation D. Average Calculation |
Peak Calculation |
|
|
|
Category: Custom Polling You want to reduce the number of decimal places returned by an UnDP you created. Which Transform should you use to do this? A. Maximum B. Minimum C. ColumnMaximum D. Truncate |
Truncate |
|
|
|
Category: Custom Polling Which of the following object types can you apply in Universal Device Poller? Choose two. A. Nodes B. Volumes C. Interfaces D. Servers |
Nodes & Interfaces |
|
|
|
Category: Dependencies & Groups Your core router is about to reboot. What should you do so that alerts about the status of devices behind the core router do not fire during the reboot? A. Suppress the alert if the core router is down B. Configure dependencies between the core router and affected devices C.Disable all alerts during the reboot D. Configure longer thresholds on the alerts |
Configure dependencies between the core router and affected devices |
|
|
|
Category: Dependencies & Groups When you create a manual dependency in NPM, a group can be designated as a child object, but NOT as a parent object. Parent objects must not be a member of any group in order to be designated as a parent object. A. True B. False |
False |
|
|
|
Category: Maps
You created nested maps in Network Atlas. You want the top-level map to show as down when half of the objects under it are down. How do you accomplish this?
A. Set availability thresholds for devices to above 50% B. Set map status thresholds to above 50% C. Set map status thresholds to below 50% D. Set availability thresholds for devices to below 50% |
Set map status thresholds to below 50% |
|
|
|
Category: Maps You want link statuses to be displayed on a map you are creating in Network Atlas. How do you accomplish this task? A. Drag and drop the status object on the link line B. Edit the link line and select the appropriate router interface C. Edit the router interface and enable Link Status D. Edit Router Status and enable the Link Status option |
Edit the link line and select the appropriate router interface |
|
|
|
Category: Node Management & Discovery While manually adding a single node, it is not possible to assign Universal Device Pollers from the Add Nodes page. You can only assign Universal Device Pollers from the Universal Device Pollers application.
A. True B. False |
False |
|
|
|
Category: Node Management & Discovery For an upcoming maintenance window, you want to ensure that alerts about affected devices do not trigger. What should you do? A. Unmanage the device for the duration of maintenance window B. Delete the Node. Add it back after the maintenance window C. Go to List Interfaces and deselect all the interfaces of device D. Nothing, this is the default Orion setting |
Unmanage the device for the duration of maintenance window |
|
|
|
Category: PerfStack
Users in a remote office are reporting that access to network resources is slow. You decide to use PerfStack to investigate the issue. Which statistics should you use in order to find a correlation between the amount of traffic and how close the interface is to being fully saturated? Choose two.Status
A. Transmit Discards B. Transmit Percent Utilization C. Average transmit bps D. Average CPU Load |
- Average transmit bps- Average CPU Load |
|
|
|
Category: PerfStack One of your hub sites is experiencing slow network performance. You decide to use PerfStack to find the cause of the problem. From which device would you start your analysis? A. From the central site's core router B. From the affected hub site's edge router C. From the affected hub site's firewall D. From one of the central site's switches |
From the affected hub site's edge router |
|
|
|
Category: Reports You need to ensure that each NPM user has exclusive access to reports he is responsible for. Which of the following will help you achieve this?
A. Save the reports in different sub-directories under \Reports and set those as the Report Folder for each account. B. Save the reports in different sub-directories and set the permissions for each user. C. Create the reports while logged in as each user and set the appropriate permissions. D. Use custom properties and account limitations to control report access. |
Use custom properties and account limitations to control report access. |
|
|
|
Category: Reports
You need to create a report on bandwidth utilization in your network during office hours over the previous month. How do you fulfill this requirement?
A. Pull all of the usage data and average it by month B. Pull last month's usage data and sort it by time of day C. Pull this year's usage data and filter by month D. Pull last month's usage data and filter out non-business hours |
Pull last month's usage data and filter out non-business hours |
|
|
|
Category: Restrictions & Account Limitations
Your company has two sites. Both have a local IT staff who use NPM. You want to make sure that each site can only view and manage monitored devices in their respective sites. Choose two features that when used together allow you to efficiently fulfill this requirement?
A. View Limitations B. Account Limitations C. Device Studio D. Custom Property Editor E. Perfstack |
Account Limitations & Custom Property Editor |
|
|
|
Category: Restrictions & Account Limitations
You want to ensure that an NPM user is only able to see Windows devices on any and all views in NPM. What steps will allow you do this? (Choose two) A. Create an Account Limitation B. Create a View LimitationSelect Limitation Type: Hardware Manufacturers C. Select Limitation Type: Single Machine Type D. Create a new account for Windows |
Create an Account Limitation & Select Limitation Type: Single Machine Type |
|
|
|
Category: User Interface Instead of the SolarWinds logo, you want your company logo to display on the banner area of the Orion Web Console. Which of the following will allow you to do this?
A. Use the Custom Property Editor and apply your company logo to all monitored nodes B. Use Web Console settings to upload your company logo C. Use Network Atlas to display your company images and branding D. Use Manage Views to add a custom HTML resource that contains your logo |
Use Web Console settings to upload your company logo |
|
|
|
Category: User Interface
Your company uses a web-based ticketing tool to handle IT incidents and requests. You want it to be accessible without leaving Orion Web Console. How do you accomplish this?
A. Add a custom property that points to you ticketing tool's URL B. Add user-defined links to the Menu bar C. Add a custom link to the Modules bar D. Add an external website to the Menu bar |
Add an external website to the Menu bar |
|
|
|
Category: User Management You sent a link to a report you created in NPM to key stakeholders. These individuals do not have an account in the Orion Web Console. You want them to be able to view the reports without having to create an account for them. What should you do? A. Create a service account for that they can share B. Enable the Link only option on the report C. Allow the Guest account to access the report D. Create a DirectLink account in the Orion Web Console |
Create a DirectLink account in the Orion Web Console |
|
|
|
Category: User Management
You need to ensure that an Orion user account can make changes to resources and views as needed. Which permission will allow the user account to do this with the least amount of privilege?
A. Allow Node Management Rights must be active B. Allow Admin Rights must be disabled C. Allow View Customization must be enabled D. An Account Limitation must be defined |
Allow View Customization must be enabled |
|
|
|
How do you create an analysis project from the Performance Analysis dashboard? |
1- Click My Dashboards > Home > Performance Analysis. - If you customize your dashboards, Performance Analysis might not be in the menu bar. - Click Settings > All Settings > User Accounts > Edit and note what you use for HomeTab Menu bar. - Click My Dashboards > Configure, and add Performance Analysis to the menu bar you used in HomeTab Menu bar. 2- Add entities.You can add a key entity and then add all other related entities. Hover over the entity in the metric palette and click the Add related icon. 3- Select an entity and choose metrics to drag to the dashboard. You can also drag and drop an entity directly to the charts.
|
There are three steps |
|
|
What are the different Display Transform algorithms? |
- Change Point - Difference - Linear Regression - Normalized - Percentile Standardized - Smoothing - Smoothing and Standardized - Standardized |
|
