Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
27 Cards in this Set
- Front
- Back
- 3rd side (hint)
|
TWISTING MOMENT OF SOLID CIRCULAR SHAFT SUBJECTED TO PURE TORSION |
|
|
|
TWISTING MOMENT OF HOLLOW sHAFT SUBJECTED TO PURE TORSION |
k= Di/Do |
|
|
TWISTING MOMENT FROM POWER TRANSMITTED |
|
|
|
TWISTING MOMENT FROM BELT ASSEMBLY |
|
|
|
BENDING MOMENT OF SOLID CIRCULAR SHAFT SUBJECTED TO PURE BENDING |
|
|
|
BENDING MOMENT OF HOLLOW SHAFT SUBJECTED TO PURE BENDING |
k=Di/Do |
|
|
POLAR MOMENT OF INERTIA OF HOLLOW CIRCULAR SHAFT |
|
|
|
MOMENT OF INERTIA OF HOLLOW CIRCULAR SHAFT |
|
|
|
COMBINED TORSION AND BENDING USING MAXIMUM SHEAR STRESS THEORY |
Remove (1-k^4) if Solid |
|
|
COMBINED TORSION AND BENDING USING MAXIMUM NORMAL STRESS THEORY |
Remove (1-k^4) if solid |
|
|
TOTAL NORMAL STRESS WHEN SHAFT IS SUBJECTED TO AXIAL STRESS & BENDING |
After getting total normal stress, get the maximum shear or maximum normal stresses when shaft is subjected to additional torsion using max. Shear or normal stress theory. |
|
|
EQUIVALENT TWISTING (TORQUE) AND BENDING MOMENTS WHEN SHAFT IS SUBJECTED TO FLUCTUATING LOADS |
|
|
|
COMMON WIDTH OF KEY |
|
|
|
SHEARING STRESS OF KEY |
|
|
|
COMPRESSIVE STRESS OF KEY DUE TO CRUSHING |
|
|
|
LENGTH OF KEY TO TRANSMIT MAXIMUM POWER (shaft and key are made of the same materials) |
|
|
|
LENGTH OF KEY FOR MAX POWER (shaft and key are not made of the same material) |
|
|
|
SHEARING OF BOLTS IN A FLANGE COUPLING |
|
|
|
CRUSHING OF BOLTS ON A FLANGE COUPLING |
|
|
|
FORCE-RADIUS RELATION IN A BOLT CIRCLE OF A FLANGE |
|
|
|
TOTAL TORQUE TRANSMITTED BY BOLTS ON A BOLT CIRCLE |
|
|
|
POWER TRANSMITTED OF A MAIN/LIME SHAFT ACCORDING TO PSME CODE |
|
|
|
POWER TRANSMITTED OF SHAFT CARRYING PULLEYS |
|
|
|
POWER TRANSMITTED FROM MACHINERIES HANDBOOK |
|
|
|
DIAMETER TO LENGTH RELATION OF SHAFT FOR MINIMAL DEFLECTION |
|
|
|
CRITICAL SPEED |
|
|
|
HP per screw from MACHINERIES HANDBOOK |
Used to get the number of screws |
