Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
52 Cards in this Set
- Front
- Back
Which layer of the OSI model is concerned with hubs and repeaters?
|
Physical
|
|
Switches belong to which layer of the OSI model?
|
Layer 2
|
|
In which of the following examples do the workstations share a collision domain?
|
Two computers connected to the same hub.
|
|
What is an advantage of using DHCP in a network environment?
|
Assigns IP address to hosts
|
|
XYZ County Schools is a small rural school district. Recently, the CIO was given authorization to connect the district-office LAN to the internet. A 56Kbps line was installed in the district office. What internetworking does XYZ County School have to install in order to connect the district-office LAN to the internet?
|
Router
|
|
Which protocol does PING use to check network connectivity?
|
ICMP
|
|
You want to connect Network X to Network Y creating an internetwork. Which internetworking device should you use to accomplish this?
|
Router
|
|
The purpose of a bridge is to ______________.
|
filter data on a network by MAC address.
|
|
The local school district decided at its last school board meeting to install a wired LAN in the district high school. The high school has 250 stand-alone computers. For each computer to communicate on a wired LAN, the network person must install a(n) _______________ in each computer.
|
NIC
|
|
Your network is divided into two segments. As the signal travels down the first segment, it becomes weak. To amplify the signals passing to the second segment, the network engineer installed a networking device. Which networking device did the engineer install?
|
Repeater
|
|
A switch has three computers connected to it. How many broadcast and collision domains is the switch creating?
|
One broadcast and three collision
|
|
Which physical layer network device broadcasts all incoming packets out all available ports?
|
Hub
|
|
What is the primary function of a bridge?
|
Breaks up collision domains
|
|
Which of the following is layer 4 of the OSI model?
|
Transport
|
|
You want to implement a mechanism that automates the IP configuration, including UP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this?
|
DHCP
|
|
Which of the following is a valid Class B IP address?
|
191.64.56.3
|
|
Which layer of the DoD model is equivalent to the Network later of the OSI model?
|
Internet
|
|
Which of the following is a valid Class C IP address?
|
193.5.4.88
|
|
You need to have secure communications using HTTPS. What port is used by default?
|
443
|
|
Which of the following statements is true?
|
TCP is a connected-oriented transport protocol.
|
|
Which protocol should you use if you want to dynamically assign IP addresses to network clients?
|
DHCP
|
|
Which of the following is a valid private IP address?
|
172.20.14.36
|
|
What protocol is used to find the hardware address of a local device?
|
ARP
|
|
What layer in the DoD model is equivalent to the Transport layer of the OSI model?
|
Host-to-Host
|
|
Which of the following ports are matched with the correct protcol?
|
TCP port 53: DNS
|
|
Which of the following is a valid Class A IP address?
|
126.5.22.36
|
|
Which protocol translates TCP/IP addresses to MAC addresses?
|
ARP
|
|
What class of IP address provides a maximum of only 254 host addresses per network ID?
|
Class C
|
|
Which of the following is a layer 2 broadcast?
|
FF.FF.FF.FF.FF.FF
|
|
A host automatically configured with an address from which of the following ranges indicates an inability to contact DHCP?
|
169.254.x.x with a mask of 255.255.0.0
|
|
Which of the following statements is true in reference to the following IP address? 10.10.10.1
|
It is a Private Class A address.
|
|
Which of the following is a valid Class A address?
|
126.10.0.1.255.0.0.0
|
|
Which statement regarding private IP addresses is most accurate?
|
A remote host across the internet cannot ping your host if it has a private address.
|
|
Which of the following is a Class A IPv4 address?
|
120.176.150.1
|
|
You want to ping the loopback address of your local host. Which address could you type?
|
ping 127.0.0.1
|
|
In a Class C IP address, how long is the network address?
|
24 bits
|
|
Which of the following describes a broadcast address?
|
All host bits are on (1s).
|
|
Which of the following is a Class C IPv4 address?
|
201.150.176.1
|
|
Which of the following is a valid Class B address?
|
129.1.1.1 255.255.0.0
|
|
When networked computers boot up, they are configured with a 169.254.x.x IP address. They cannot access Internet resources. What is the problem?
|
The DHCP server is down.
|
|
Which of the following is a valid IP address that can be used on the Internet (meaning the public addressing scheme)?
|
168.16.1.1
|
|
Which of the following is the default subnet mask for a Class B IPv4 address?
|
255.255.0.0
|
|
A ndoe on a network has an IP address of 140.133.28.72 and its subnet mask is 255.248.0.0. What type of subnetting has been used on the network?
|
Classless
|
|
You have one public IP address available to use to access resources outside your network. However, you have 300 users that need to access the Internet. What technology will you use to implement a solution?
|
PAT
|
|
What is the problem when network computers can access websites using an IP address only?
|
The DNS Server is down.
|
|
What is the default subnet mask for a Class C network?
|
255.255.255.0
|
|
On which of the following devices are you most likely to implement NAT?
|
Router
|
|
What does the term overloading mean when used in conjunction with NAT?
|
when there are more private IP addresses than public IP addresses.
|
|
Which of the following describes an IP address as it exists on the LAN before translation by NAT?
|
Inside Local
|
|
Which of the following is NOT a type of NAT?
|
Private NAT
|
|
When configuring the IP settings on a computer on one subnet to ensure that it can communicate with a computer on another subnet, which of the following is desirable?
|
Configure the computer with a default gateway that matches the IP address of the interface of the router that is attached to the same subnet as the computer.
|
|
What network service provides a large number of users access to the Internet through a single registered IP address?
|
NAT
|