Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
24 Cards in this Set
- Front
- Back
What will happen if heat is applied to a confined fluid?
|
Pressure will increase
|
|
What terms are used to describe the physical qualities of fluids?
|
Pressure transmission, incompressibility, expansion and contraction.
|
|
Who said "All gases expand and contract in direct proportion to the change in temperature, provided the pressure is constant?
|
Charles
|
|
What formula do you use to calculate the volume of a cylinder?
|
V=╥r²*H (length)
|
|
What is the volume of a cylinder 5 inches high (length) with a 1-inch radius?
|
15.7 in³
|
|
What would be the volume of fluid displaced if an actuator with a 3 in² piston moves a distance of 12 inches
|
36 in³
|
|
To obtain mechanical advantage use the formula, mechanical advatage equals________
|
resistance divided by effort.
|
|
The law of conservation states that energy can be __________
|
Neither created or destroyed
|
|
In the metric system all basic units are divisible by __________
|
10
|
|
To convert centigrade temperture to Fahrenheit you would ___________
|
multiply the centigrade temperature by 1.8 and add 32.
F=1.8C+32 |
|
If the lift of an aircraft is equivalent to it's weight, theoretically, the aircraft should___________
|
maintain a constant altitude
|
|
If an aircraft's thrust is as great as its drag, the aircraft should _____
|
maintain a constant speed.
|
|
Which flight axis extends lengthwise through the fuselage from the nose to tail
|
Longitudinal
|
|
The flight control surface that provides directional control about the vertical axis is the______
|
rudder
|
|
Flaps are normally operated ____
|
electrically or hydraulically.
|
|
The automatic flight control system that improves the handling characteristics when the pilot is flying manually is the _____________
|
stability augumentation
|
|
Corrosion is defined as the __________________
|
deterioration of a metal by reaction to its enviornment.
|
|
Generally, trim systems are operated hydraulically, _______, or __________.
|
electrically, or electrohydraulically.
|
|
The first indication of pitting corrosionon aluminum and magnesium alloy is __________
|
white powdery deposits on the metal surface.
|
|
What are two types of penetrant inspections?
|
Flourescent and dye.
|
|
Where is the best place to start inspecting an aircraft rudder control system?
|
In the flight deck.
|
|
How much pressure should be in the hydraulic system when the accumulator is initially air charged?
|
Zero
|
|
You should check a strut's fluid level when the strut is fully _____ and ______.
|
deflated and compressed.
|
|
Shock struts should be serviced with ______.
|
nitrogen
|