Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
67 Cards in this Set
- Front
- Back
What does HERO stand for? |
Hazards of Electromagnetic Radiation to Ordnance |
|
HERO pubs? |
OP 3565/NA 16-1-529 |
|
Explosive Safety pub ashore? |
OP 5 |
|
Explosive Safety pub afloat? |
OP 4 |
|
Qual/Cert Instruction |
OPNAVINST 8023.24C |
|
How many Work Task Codes are there? |
7 |
|
Work Task Code 1 |
Handling |
|
Work Task Code 2 |
Storage and Stowage |
|
Work Task Code 3 |
Assembly and Disassembly |
|
Work Task Code 4 |
Load and Download |
|
Work Task Code 5 |
Arm and De-arm |
|
Work Task Code 6 |
Install and Remove |
|
Work Task Code 7 |
Testing |
|
What courses need to be completed prior to certification? |
Ammo-18 for E-4 and below Ammo- 49 for E-5 and above |
|
How long is an ordnance physical good for? |
5 years |
|
What is OPNAV 8020/5? |
Ordnance certification |
|
How long is the certification good for? |
1 year to the last day of certification month |
|
Note |
Emphasis |
|
Caution |
Potential injury or damage to equipment |
|
Warning |
Potential injury or death |
|
Who can stop and evolution? |
Anyone |
|
Who can restart an evolution? |
Quality Assurance Safety Observer (QASO) |
|
Two marine location markers? |
MK-58 and MK-25 |
|
Brun time for MK-25? |
13.5-18.5 minutes |
|
Burn time for MK-58? |
40-60 minutes |
|
How can the MK-25 be launched? |
By hand or sonobuoy launcher |
|
Missile launcher used on Romeos |
M299 |
|
What type and how many missiles can be loaded on the M299? |
4 of the AGM-114 Hellfire missiles |
|
Where can you NOT stand when handling Hellfire? |
Directly in front or behind it |
|
Primary target for Hellfire |
Tanks and armored vehicles |
|
What support equipment is used for transport of the Hellfire missile? |
1 MHU-191 and 2 ADU-514’s |
|
How many qualified personnel is required to load a Hellfire missile? |
1 QASO, 1 Team Leader, 3 Team Members forward, middle, and aft of the missile for inboard rails (5) |
|
How many chaff and flares can one ALE-47 dispenser hold? |
30 |
|
What PPE is required when building chaff and flare buckets? |
Leather gloves and cranial |
|
How many rockets can the LAU-61G/A hold? |
19 |
|
How many qualified personnel does it take to load the LAU-61G/A? |
1 QASO, 1Team Leader, 1 Team member on the hoist, and 2 Team Members forward and aft of the launcher (5) |
|
What SE is used to load the LAU-61G/A? |
Single Hoist Ordnance Loading System (SHOLS) |
|
What SE is used to transport the LAU-61G/A? |
1 MHU-191, 2 AERO 58 adapters, and 2 AERO 64A adapters |
|
Types of guns used on Romeos? |
GAU-21 and M240D |
|
What size rounds does the GAU-21 use? |
.50 cal |
|
What size round does the M240D use? |
7.62MM |
|
What is the sustained rate of fire for both guns? |
100 rounds per minute (RPM) |
|
What must be done prior to removal of either gun from the aircraft? |
Clear and safe the weapon by the HAC |
|
How many rounds can you fire on a GAU-21 before a post fire inspection is required? |
1,200 rounds |
|
Where can’t you stand when handling torpedoes? |
In front of the suspension bands |
|
What does the blue band mean? |
Inert |
|
What does the yellow band mean? |
High explosive/live |
|
What is the safe working load of the BRU-14/A? |
2,200 lbs |
|
What are two types of CADs used with the BRU-14/A? |
MK-17 and M55 |
|
What is the definition of CAD? |
Cartridge Actuated Device A device utilizing the power of a cartridge to produce energy to accomplish work |
|
What instruction governs all small arms security requirements? |
OPNAVINST 5530.13 series |
|
What cartridges can be used with an ALE-47? |
CCU-136A/A |
|
What type of suspension band is used for the MK-46/54 torpedo? |
MK-78 mod 1 |
|
How much does the MK-48 torpedo weigh? |
568.8 lbs |
|
What does EMATT stand for? |
Expandable Mobile ASW Training Target |
|
If there is a difference between the checklist and loading manual, which do you adhere to? |
Which ever is most current. If both are dated the same, then adhere to the loading manual |
|
Sections of the Loading Manual |
1. Introduction 2. Description 3. Configuration 4. Release and Control Checks 5. Common Procedures |
|
What is the first thing you check when installing and removing CADs? |
Circuit breakers |
|
What does IFOBRL stand for? |
In-Flight Operable Bomb Rack Lock |
|
What must be done prior to loading any ordnance? |
Grounding the aircraft |
|
How do you remove the ground from the aircraft? |
Aircraft point first |
|
What does LEMA stand for? |
Linear Electromechanical Actuator |
|
Who is the Ordnance Handling Board Chair? |
Ensign Orr |
|
Who is the Explosive Qual/Cert Program Manager? |
AO3 Morales |
|
Who is the Explosive Qual/Cert Program Monitor? |
AO1 Lyle |
|
Above all, what is paramount when handling ordnance? |
Safety |
|
What is the OPNAV 5530/1? |
AA&E Screening (Arms, Ammunition, and Explosives) |