• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/29

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

29 Cards in this Set

  • Front
  • Back
What is the basic unit of voltage?
The Volt.
What is the basic unit of current?
The Amp.
What is the basic unit of resistance?
The ohm.
Which law of electricity is the most important for an aircraft mechanic to know?
Ohm's law.
What are the three elements in Ohm's law?
Voltage, current, and resistance (volts, amps, and ohms).
What are five sources of electrical energy?
Magnetism, chemical energy, light, heat and pressure.
What four things affect the resistance of an electrical conductor?
The material, the cross-sectional area, the length and the temperature.
How can you tell the resistance of a composition resistor?
By a series of colored bands around one end of the resistor.
What three things must all electrical circuits contain?
A source of electrical energy, a load to use the energy, and conductors the join the source and the load.
What is the purpose of a capacitor?
To store electrical energy in electrostatic fields.
What is the basic unit of capacitance?
The farad.
Why should electrolytic capacitors not be used in an AC circuit?
They are polarized. An electrolytic capacitor will pass current of one polarity, but will block current of the opposite polarity.
What is meant by inductance?
The ability to store electrical energy in electromagnetic fields.
What is the basic unit of inductance?
The henry.
What is meant by impedance?
The total opposition to the flow of alternating current. It is the vector sum of resistance, capacitive reactance and inductive reactance.
How can you find the polarity of an electromagnet?
Left hand rule.
In what units is impedance measured?
In ohms.
What is the basic unit of electrical power in a DC circuit?
The watt.
What is meant by a kilowatt?
1,000 watts.
What happens to the current in a DC circuit if the voltage is increased but the resistance remains the same?
The current increases.
What are three types of DC circuits, with regard to the placement of various circuit components?
Series, parallel and series-parallel.
How many cells are there in a 24-volt lead-acid battery?
12.
What is the specific gravity of the electrolyte in a fully charged lead-acid battery?
Between 1.275 and 1.300.
What is the range of temperatures of the electrolyte in a lead-acid battery that does not require that you apply a correction when measuring its specific gravity?
Between 70 degrees and 90 degrees Fahrenheit.
What instrument is used to measure the specific gravity of the electrolyte in a lead-acid battery?
A hydrometer.
How is a lead-acid battery compartment treated to protect it from corrosion?
Paint it with an asphaltic (tar base) paint or with polyurethane enamel.
What is used to neutralize spilled electrolyte from a lead-acid battery?
A solution of bicarbonate of soda and water.
How high should the electrolyte level be in a properly serviced lead-acid battery?
Only up to the level of the indicator in the cell.
What precautions should be taken in a maintenance shop where both lead-acid and nickel-cadmium batteries are serviced?
The two types of batteries should be kept separate and the tools used on one type should not be used on the other.