Study your flashcards anywhere!

Download the official Cram app for free >

  • Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/11

Click to flip

11 Cards in this Set

  • Front
  • Back
What are the basic requirements for Respiratory Protection Program
identifies employees as requiring respirator protection
What are the basic requirements for Hearing Conservation program
surveys and identifies potentially hazardous noise levels
What are the basic requirements for Sight Conservation program
surveys all activity work areas and decides which are hazardous for eyes
What are the basic requirements for Personal protective equipment
A progam which assess all workplaces to determine which ppe should be worn
Identify the F\A -18 danger areas
flammable liquids, compressed gases, canopy, seats, DFIRS explosive devices, stores, engine, radar antenna, APU exhaust, arresting hook, all moving flight control surfaces
Identify the minimum safe distances from turning aircraft intakes, and exhausts at Idle, Military, Max?
Idle: 9ft intake, 115-55ft from exhaust
MiL: 25ft intake, 325-725ft exhasut
MAX: 25ft intake, 850-925ft exhaust
identify location of aircraft no step areas
avoid flaps,stabs,ailerons,radome surfaces, and others labeled no step
general safety precautions with applying and removing external power
circuit breakers and switches must positioned as specified in the required MIMS
Idntify personnel danger area during APU operation
Exhasut velocity reaching 142mph to the deck with temp of 328-350 farenheit
State precautions\restrictions that apply to peforming maintenance on ordnance loaded aircraft
Major maintenance prohibited. Minor maintenance and routine servicing to ready a\c for next launch can be done after ordnance is safetied to the maximum as specified in loading checklist
Identify the precautions that must be observed when handling graphite or carbon\epoxy composite materials
Wear respirators, goggles when exposed to these materials and in addition wear close weave cotton gloves when handling