• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/10

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

10 Cards in this Set

  • Front
  • Back

1.

Put on seat belt

2.

Build air pressure to normal range (100 psi to 125 psi)

3.

Turn the engine OFF

4.

Release the parking brake and emergency brake (push in the red and yellow knob) wait for the air to stabilize. Then time one minute, should not lose more than 3 psi in that minute

5.

Press the brake pedal and hold it. Then time one minute, should not lose more than 4 psi in that minute

6.

Turn the key on (not the engine)

7.

Pump on the brake pedal. The warning light and buzzer will come on when the air pressure gets to 60 psi or more.

8.

Turn the key off

9.

Pump on the brake pedal. The parking brake and emergency brake knobs will pop out when the air pressure gets to 20 psi to 45 psi (look at them to make sure they both pop out; dont pull them out)

10.

Start the engine. Accelarate to 1000 to 1200 RPMS the air pressure should reach 105 psi to 115 psi in 3 minutes to 3.5 minutes.