Vol. 1 Unit 2 Self Test Questions

Front 1

Under what 6 inspection concepts are AF aircraft inspected?

Back 1

1. Periodic 2. Phased 3. Isochronal 4. Aerospace vehicle manufacturer 5. Programmed depot maintenance 6. Contingency decks

Front 2

How long is a pre flight inspection valid for on a locally flying aircraft?

Back 2

24, 48, or 72 hours (If 72 hours and aircraft hasn't flown in 48 consecutive hours another inspection is required)

Front 3

Which inspection is accomplished just prior to takeoff?

Back 3

End of runway

Front 4

What type of inspection would you perform on an aircraft that lands for refueling and plans to continue its flight immediately?

Back 4

Thru Flight

Front 5

When is a BPO inspection completed?

Back 5

After the last flight of a specified flying period

Front 6

What type of inspection determines if the aircraft is suitable for another flight?

Back 6

BPO

Front 7

When is an HPO inspection performed?

Back 7

After a specified number of flying hours have accumulated

Front 8

Which inspection does the HPO augment

Back 8

BPO which is usually done at the same time

Front 9

A periodic inspection includes the recurring inspection items for what 2 inspections?

Back 9

HPO or BPO

Front 10

What's the main objective of the phase inspection?

Back 10

To reduce out of commission time for any given aircraft.

Front 11

How many inspections are included in the ISO inspection concept and what are they?

Back 11

1. Major 2. Minor 3. Home station checks

Front 12

When are major, minor, and home station checks due?

Back 12

Major- based on the number of calendar dates from the start date of the last major inspection

Minor- at completion of mission during which a specified number of calendar days accrued

HSC- same as major and minor

Front 13

What does the minor inspection consist of?

Back 13

Checking certain components and systems to ensure that no condition exist that could result in failure before the next major inspection

Front 14

Describe the HSC

Back 14

Combo inspection of former HPO and BPO items

Front 15

If an aircraft is idle for more than 30 days, what type of inspection must be performed?

Back 15

Calendar inspection

Front 16

When is an acceptance inspection performed?

Back 16

When an aircraft is newly assigned

Front 17

3 occasions when a special inspection is required

Back 17

1. After a certain number of flying hours 2. After a specific calendar time. 3. After a specific or unusual condition occurs

Front 18

What 2 conditions or occasions may require installation of the replacement items listed in -6 TO replacement schedule?

Back 18

1. After a specific interval of time 2. Following the occurrence of a specific condition

Front 19

List the 4 basic requirements for adequate inspection facilities

Back 19

1. Adequate heat 2. Illumination 3. Ventilation 4. Communication

Front 20

What items should each inspection team have to perform their inspection efficiently?

Back 20

1. Applicable -6 inspection WCs, TOs, and work unit code manuals 2. Adequate hand tools and special tools. 3. Bench stock and petroleum products for servicing 4. A card bin for controlling inspection WCs.

Front 21

What's the primary purpose for using maintenance symbols on aircraft forms?

Back 21

To make important notations instantly apparent

Front 22

Hie should a symbol be entered in the symbol block for maintenance documents?

Back 22

In red from corner to corner

Front 23

Under what circumstances would you enter a red X in the symbol block of maintenance documents?

Back 23

When equipment is unsafe to use

Front 24

Which red maintenance symbol should be used to indicate that the condition of the equipment is unknown?

Back 24

Red dash

Front 25

What type of maintenance document entries do not require the entry of a symbol in the symbol block?

Back 25

Informational notes that don't affect flight safety or flying efficiency

Front 26

What types of discrepancy do not require documentation on AFTO form 781 A?

Back 26

Discrepancies resulting from battle damage

Front 27

What symbols can be transferred to 781 K?

Back 27

Diagonal and dash

Front 28

What symbol can be transferred to the 781 K?

Back 28

Diagonal and dash

Front 29

What's the procedure for documenting a warning note in the discrepancy block of AFTO form 781 A?

Back 29

The word NOTE in red followed by the remarks in red.

Front 30

When the condition requiring a warning note in the DISCREPANCY block no longer applies, what action is taken to close it out?

Back 30

Line through the note

Front 31

In block 13 of AFTO form 781H, how do you document fuel that is removed from the aircraft?

Back 31

In red with a - in front

Front 32

On AFTO form 781H, who enters their name in block 14?

Back 32

The person who performed or supervises

Front 33

Prior to using an equipment item, on what part of the 244 do you document the inspection of an item?

Back 33

Part 2 non scheduled inspection

Front 34

What part of the 244 is used to document overdue special inspections?

Back 34

Part 5 industrial/ support equipment record

Front 35

As a minimum, what actions must be annotated on the 95?

Back 35

Install/removal dates and component accumulated hours, reason for removal and maintenance performed

Front 36

What block of the 95 do you annotate the manufacturer name?

Back 36

Block 2

Front 37

What documents stay with the aircraft to depot, contractor repair or when it's transferred?

Back 37

427, 781A, and 781 K