Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
16 Cards in this Set
- Front
- Back
What percentage of man hours can be spent on conduit fabrications |
50 % |
|
The material cost for large conduit bending job can be reduced by using |
Field made bends |
|
What may adversely affect pvc conduit? |
Temperature extremes |
|
Take up for a 3/4 emt bender is... most |
6 inches |
|
Most common angels for 3 bends saddles |
45 and 22 1/2 degree |
|
RMC can be used in a location where is may be subjected to |
Servers physical damage |
|
Trig |
Is a tool for providing an easy path to understanding the procedures for making accurate conduit bends |
|
2 3/4, 5 1/8, 10 3/10 |
Mixed numbers |
|
Hypotenuse |
The side opposite the 90 degree angle in a right triangle |
|
Misaligned bends, conduit being rotated exactly 180 degrees before the second being made are the results of |
A dog leg |
|
Gain |
The difference between the run length including the straight distance and the actual length of conduit, including the arc length |
|
Angle |
A measure of rotation of two lines |
|
EMT art |
358 |
|
IMC art |
342 |
|
Rigid art |
344 |
|
PVC art |
352 |