Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
Widebelt Sander: What is the min. Length
|
12"
|
|
What is the Max depth of cut?
|
1/2 a turn
|
|
What is the standard depth of cut?
|
1/4 to 1/3 of a turn. Wide panels may require as little as 1/8 turn
|
|
What wood is not allowed to be sanded?
|
Pine, Fir, or green(wet) wood.
|
|
What clogs the belt?
|
Sanding with glue, putty, or finish.
|
|
What is the min. thickness that you can sand?
|
1/4" without the use of a carrier board.
|
|
ROUTERS:
WHat must you do before turning on the machine? |
Make sure the bit is tightly secured.
|
|
What must you make sure you do to change a bit or make adjustments?
|
Unplugged
|
|
freehand routing is allowed on the overarm router or table router?
|
False
|
|
You should use both the fence and the pilot together when possible
|
True
|
|
What direction do you feed the stock at?
|
Direction against the rotation.
|
|
You should route the edge grain before the end grain.
|
False: route the end grain, then the edge grain.
|
|
Heavy shapes may need two or three passes at a lighter setting?
|
True
|
|
How fast should you feed the stock?
|
Slow enough to give a good cut, but fast enough to prevent burning.
|
|
SCROLL SAW
WHich direction should the teeth point? |
Towards the table
|
|
How high should the guide be adjusted to?
|
1/8" above the work
|
|
Make all adjustments before you turn on power
|
True
|
|
MORTISER: Before you turn on the machine, what must you check for?
|
Make sure the bit will not contact the metal table, the fence, or the hold down clamp.
|
|
What must you check regarding the chuck key?
|
Make sure it is removed from the chuck before turning on power
|
|
When taking a partial cut, center the chisel on the stock being cut.
|
True
|
|
AIR HOSE:
What three safety things should you remember when using a air hose? |
1. never hold the tip of the air nozzle against the skin
2. Do not spray compressed air directly at yourself or others 3. Use both hands when disconnecting an air hose from a tool or source connection. |
|
PNEUMATIC NAILERS AND STAPLERS
What are three safety tips to remember when using nailers and staplers |
1. Never point towards yourself or others
2. Safety mechanisms may not be removed 3. Must use eye protection and ear protection |
|
TABLE SAW DATO"'s and RABETS
It is okay to cut into the dado fence. |
False. do not cut into the dado fence
|
|
Which direction should the saw teeth point toward?
|
Toward the operator
|
|
What should you check with the carbide teeth?
|
THat they are not contacting any metal surfaces including other teeth
|
|
WHat is thet minimum width a dado head can be set up t o cut at?
|
The min is 1/4" (two 1/8" outside cutters)
|
|
Drawer rings;
What should run parallel to the drawer fronts? |
The stiles
|
|
What is the drawer rings standard net thickness?
|
3/4" and width of 2 1/2"
|