Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
1.As a CDI/CDQAR what would you use to verify TD compliance on “I” level equipment?
|
NAT01
|
|
2.When taking over a program, how long do you have as the program manager to perform a self audit?
|
30 DAYS
|
|
3.How long do you have to keep historical MAFS in Aircrew Flight Equipment Record?
|
A MINIMUM OF 6 MONTHS OR ONE COMPLETE INSPECTION CYCLE, WHICH EVER IS GREATER
|
|
4.How much non-white reflective tape is authorized on the HGU-84?
|
30 SQUARE INCHES
|
|
5. Is rounding the corners on the 2x2 pile installed on the HGU-84 authorized?
|
YES
|
|
6.The force required to pull the latch through the ball detent, releasing the latch on the aircrew safety belt, shall not be less than?
|
5 LBS
|
|
7. Are amendments required to be documented with a MAF and to be annotated on any ALSS records?
|
NO
|
|
8.What is the number one contributor to FOD?
|
POOR HOUSE KEEPING
|
|
9. What does the word “warning” mean in relation to aviation maintenance?
|
Warning refers to a procedure or practice that, if not correctly followed, could result in injury, long term health hazards, or death.
|
|
10.What does AMA stand for and what are they intended for?
|
AVIATION MAINTENANCE ADVISORY
|