Reading...
Play button
Play button
Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
7 Cards in this Set
- Front
- Back
|
Regarding the loading of single action revolvers, these usually have a right side loading gate that is swung open to permit access to one chamber at a time. TRUE/FALSE
|
TRUE.
|
|
|
Double action revolvers permit the whole barrel to open and be exposed. TRUE/FALSE
|
TRUE.
|
|
|
In revolvers, describe the double action mode.
|
It is fired simply by pulling the trigger through its double action arc. The cylinder is automaticly advanced and both cocks the hammer and releases it when fully cocked.
|
|
|
Can most double action revolvers be fired in a single action mode?
|
Yes.With the gun pointed safely, the hammer is first cocked. cocking the hammer advances the cylinder to the next chamber.
|
|
|
Is there a noticeable difference between single and double action trigger feel?
|
Yes. In double, the trigger feel is long and heavy usually around 8-15 lbs.
In single, the trigger releases after a very short pull. 2-3 lbs is usally the required psi force. |
|
|
What must be done to decock a revolver?
|
1. Put trigger finger outside of trigger guard.
2. Place support hand thumb between hammer and frame, pull the trigger. 3. Ease the ammer forward until it touches the support hand thumb. 4. Ease the ammer the rest of the way slowly, always making sure that the gun is pointed safely. |
|
|
In single action revolvers, the index finger of the firing hand engages the ejector rod and pulls the rod rearward to push the case or cartridge out. TRUE/FALSE
|
TRUE.
|
