• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/10

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

10 Cards in this Set

  • Front
  • Back

Fiber optic cable is immune to interference.


True or false

True

Which of the following is a common characteristic of a networking medium? (choose all that apply)


-frame type


-bandwidth rating


-scope


-interference susceptibility


-maximum segment length

Bandwidth rating, interference susceptibility, maximum segment length

When two cables run side by side, signals traveling down one wire might interfere with signals traveling on the other wire. What is this phenomenon called?


-all of choices


-crosstalk


-interference


-RFI


-bleed over

Crosstalk

Which of the following wireless technologies does a 802.11 wireless network using he 2.4 GHz frequency range use?


-narrowband radio


-all of these choices


-direct-sequence spread spectrum


-infrared


-frequency hopping

all of these choices

Most office buildings usually have a false ceiling with an area above that which is used to run conduit for heating and air conditioning units, called the _________.

plenum

Which of the following is the process for representing bit signals on the medium?


-demultiplexing


-encryption


-multiplexing


-transceiving


-none of these choices

none of these choices

What is the maximum cable length for both category 5e and category 6 UTP cable?


-500 m


-none of these choices


-1000 m


-250 m


-328 m

none of these choices (100 m)

The two main types of fiber-optic cable are single-mode and multimode fiber.


True or false

True

What are all of the connections in a network considered, including the cables and their connectors?


-work area


-horizontal wiring


-telecommunications closet


-patch panel


-cable plant

patch panel

The entrance facility is the place where the connection to a WAN is located. It is basically the point where the LAN begins and ends. What is another name for this point?


-entrance facility


-gateway


-firewall


-all of these choices


-demarcation point

demarcation point