Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
|
Which step should be performed first when deleting a VLAN that has member switch ports? |
Reassign all VLAN member ports to a different VLAN. |
|
|
A switch receives a frame on a trunk port, but the frame is tagged with the same VLAN ID as the native VLAN of the trunk link. What happens to that frame? |
The frame is dropped. |
|
Refer to the exhibit. All workstations are configured correctly in VLAN 20. Workstations that are connected to switch SW1 are not able to send traffic to workstations on SW2. What could be done to remedy the problem? |
Allow VLAN 20 on the trunk link. |
|
|
Which two statements describe the benefits of VLANs? |
VLANs improve network security by isolating users that have access to sensitive data and applications. VLANs divide a network into smaller logical networks, resulting in lower susceptibility to broadcast storms. |
|
|
assigns VLAN 10 for untagged traffic |
Switch(config-if)# switchport trunk native vlan 10 |
|
|
activates the current interface as trunk |
Switch(config-if)# switchport mode trunk |
|
|
prohibits VLAN 10 on the trunk interface |
Switch(config-if)# switchport trunk allowed vlan remove 10 |
|
|
For what reason would a network administrator use the show interfaces trunk command on a switch? |
to view the native VLAN |
|
What protocol should be configured on SW-A FastEthernet 0/1 if it is to send traffic from multiple VLANs to switch SW-B? |
IEEE 802.1Q |
|
|
What is the purpose of the switch command switchport access vlan 99? |
to assign the port to a particular VLAN |
