Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
15 Cards in this Set
- Front
- Back
Which of the following is not found on a title block?
A. Scale of drawing B. Name of design supervisor C. Bill of materials D. Drawing title |
Bill of materials |
|
The symbol in figure 1 is used to represent a _______. |
Flanged Tee |
|
The symbol in figure 2 is used to represent a ______.
A. Butt welded 45- degree ell B. Flanged concentric reducer C. Butt welded eccentric reducer D. Flanged tee |
Butt welded eccentric reducer |
|
The abbreviation for a raised-face weld neck flange is ?
A. RFSF B. RFWN C. RW D. RFSO |
RFWN |
|
The abbreviation LR means?
A. Left and right B. Leave remainder C: long radius D. Lift ring |
Long Radius |
|
The abbreviation ID stands for?
A. Ductile iron B. Inside dimension C. Induction drive D. Inside diameter |
Inside diameter |
|
The line list will not specify ?
A. The specifications for a line of pipe B. What each line transports C. Start and termination points D. Scale of the drawing |
Scale of drawing |
|
An elevation view is seen from the top of the structure?
A. True B. False |
FALSE |
|
A view of the construction from a line cut through the middle is called ???
A. Plan view B. Section view C. Slice view D. Plot view |
Section view |
|
A PI&D drawing shows ?
A. Pipes only B. Pipes and their diameters C. Parts and isometric drawing D. Pipes and instrumentation |
Pipes and instrumentation |
|
An ISO shows the parts of the assembly as well as the direction of flow??
A. True B. False |
TRUE |
|
A spool is a ??
A. Wheel B. Piping segment C. Special valve D. Drawing showing bolts and gaskets |
Piping segment |
|
Certified equipment drawing do not require compliance by equipment to specification ?
A. True B. False |
True |
|
A simple orthographic sketch shows the object from ?
A. A 30-degree angle B. A 45-degree angle C. One side only D. The pipe fitters viewpoint |
Pipefitters viewpoint |
|
An isometric sketch shows the object from ?
A. Two or more sides at once B. The top only C. Top, end, and side separately D. The pipe-fitters viewpoint |
Two or more sides at once |