Navair 00-25-100 Wp 6

Front 1

The product data division interfaces with the fleet user activities to resolve issues associated with the use of all technical data products produced by what?

Back 1

NATEC

Front 2

While TM assistance may be obtained from all NATEC product data personnel what are pre positioned at naval air stations throughout the country?

Back 2

PRODUCT DATA DIVISION TECHNICAL PUBLICATION SPECIALIST

Front 3

What continuing program must be maintained to assure the adequacy accuracy and usability of technical documentation?

Back 3

TM QUALITY ASSURANCE

Front 4

NATEC Branch is staffed with what to oversee the quality of manuals delivered to the fleet?

Back 4

DATA MANAGEMENT SPECIALISTS

Front 5

Normally who will be associated with the DMS during in process reviews adequacy reviews or verifications?

Back 5

FLEET TECHNICIAN

Front 6

What are used to review existing manuals to determine if they are acceptable for use by NAVAIR users?

Back 6

TECHNICAL MANUAL ACCEPTABILITY REVIEWS

Front 7

What are used to identity the specific TM problems for correction?

Back 7

FLEET REVIEWS

Front 8

WORK PACKAGE 007

Back 8

007

Front 9

What is defined as how effectively the presented information describes the system or equipment configuration and required maintenance data?

Back 9

TECHNICAL DOCUMENTATION USABILITY

Front 10

In general hardware configurations and maintenance concepts are what?

Back 10

FLUID

Front 11

It is mandatory that what maintains an effective update method to ensure that TMs keep pace with hardware configuration?

Back 11

NAVAL AIR SYSTEM COMMAND

Front 12

For revisions and changes to Naval Air Training and operating procedures standardization program publication refer to what instruction?

Back 12

OPNAVINST 3710. 7

Front 13

What are issued by Naval activities or contract administrative offices as a formal change to a TM?

Back 13

RACs

Front 14

The determination to issue TM RACs shall be made by the commercial or government cognizant TM preparing activity in coordination with the program NATEC technical data what?

Back 14

LOGISTICS ELEMENT MANAGER

Front 15

The incorporation of RACs and IRACs into the affected TMs shall be within how many working days upon receipt?

Back 15

TWO

Front 16

What support the sustainment of interactive electronic technical manuals and accomplish the purpose and function of IRACs in a digital format?

Back 16

ELECTRICAL RAPID ACTION CHANGES

Front 17

ERAC meet the electronic requirements of specific platforms and are issued IAW those condition warranting an IRACs in a digital format?

Back 17

MIL-DTL-81748

Front 18

What are completed formal changes to applicable TMs?

Back 18

RACs

Front 19

What maybe used when funding contractual and programmatic circumstances make the use of RACs impractical?

Back 19

IRACs

Front 20

What IRACs are issued as a Naval Message to provide urgent TM change data with the exception or graphic images schematics wiring diagrams etc.. What are unsuitable for delivery by Naval message?

Back 20

TYPE A

Front 21

What IRACs issued as a hard copy or digital file to provide urgent TM changes for schematics wiring diagrams or other graphic images and other forms of graphic data that cannot be included in a type A IRAC?

Back 21

TYPE B

Front 22

The incorporation of the IRAC into the TM shall be accomplished during the next scheduled formal update but no later than how many months after their release date whichever comes first?

Back 22

12

Front 23

For electronic linking of IRACs to digital TMs refer to what?

Back 23

MIL-DTL-81748E

Front 24

maintain an IRAC/ERAC binder for each work center untilizing what?

Back 24

JKCS

Front 25

Manuals that are prepared IAW MIL-STD-38784 in the no work package format are referred to as what?

Back 25

CONVENTIONAL MANUALS

Front 26

What manuals change is the official release of new or corrected pages to a part or portion of existing document?

Back 26

ROUTINE

Front 27

The vertical line change symbol shall be what in width?

Back 27

3/32 INCH

Front 28

What WP may be changed when one or more pages have been affected by the current change to the WP manual or when a WP must have what issued against it?

Back 28

RAPID ACTION CHANGE RAC

Front 29

What constitutes a complete reissue of a manual with all updated information incorporated?

Back 29

REVISION

Front 30

Identification of a revision is made by what notice on the title page and a new issue date?

Back 30

SUPERSEDURE

Front 31

What revision incorporates the basic manual all previous changes and the new data that would require the issuance of an additional change?

Back 31

PICK UP

Front 32

What is the method for correcting minor errors in NAVAIR TMs that do not require the issuance of a formal change?

Back 32

NAVAIR TM NOTICE

Front 33

NAVAIR TM notice shall not be used to correct and or change the technical content of what?

Back 33

NAVAIR MANUALS

Front 34

WORK PACKAGE 010

Back 34

010

Front 35

What are assigned to manuals for the purpose of identification?

Back 35

CODE NUMBER

Front 36

Code numbers are identified as conventional numbering system and what else?

Back 36

TECHNICAL MANUAL IDENTIFICATION NUMBERING SYSTEM .. TMINS

Front 37

The NAVAIR manual conventional numbering system consist a prefix and combination of numbers and letters divided into how many parts separated by dashes?

Back 37

3

Front 38

What part of the TM number is a two digit number.. In some cases two digits and a letter that designate the general subject classification or major category of the manual?

Back 38

PART I

Front 39

What part of the TM number consists of numbers and or numbers and letters that identify either the basic aircraft model manufacturer of specific aircraft and engine or the specific class group or subcategory of the manual?

Back 39

PART II

Front 40

What part of the TM number may or may not have identifiable numerical significance within the airframe missile and power plant series?

Back 40

PART III

Front 41

TMs currently assigned a what will not be renumbered under the technical manual identification numbering system?

Back 41

NAVAIR NUMBER

Front 42

What is a numbering system developed in coordination with other system commands?

Back 42

TMINS

Front 43

The NAVAIR version of the TMINS was implemented by what?

Back 43

NATEC

Front 44

TMINS numbers are not to be used for what purposes?

Back 44

REQUISITIONING

Front 45

TMINS is how many character alphanumeric technical manual code number?

Back 45

13

Front 46

IAW NAVSUPINST 5600. 25 and NAVSUPINST 5600. 26 a stock number and or bar code has appeared in the lower left corner on title pages of all NAVAIR TMs distributed after what date?

Back 46

1 AUGUST 1986

Front 47

WORK PACKAGE 01200

Back 47

01200

Front 48

The policies and agreements for assuring maximum exchange of TMs and associated information on common use equipment by the military service and the defense logistics agency are covered in what instruction?

Back 48

OPNAVINST 5600. 22

Front 49

The JIL is divided into five sections as followed: army navy air force marine corps and what else?

Back 49

DEFENSE LOGISTICS AGENCY

Front 50

The single point of contact for NAVAIR publications media is what?

Back 50

NATEC

Front 51

The exchange of TMs is predicated on what requirements and is made on a no cost basis?

Back 51

REASONABLE QUANTITY

Front 52

One time requisitions not to exceed a quantity of how many copies each for air force TOs can be submitted by letter?

Back 52

25

Front 53

Activities not desiring or required to establish an account for army manuals may request a one time issue of TMs on organizational letterhead or what else?

Back 53

DD FORM 1149

Front 54

The component managers control offices are listed in what instruction?

Back 54

OPNAVINST 5600. 22

Front 55

WORK PACKAGE 01300

Back 55

01300

Front 56

What has established a centralized management program for the aquistion and maintenance of technical manuals?

Back 56

NAVAIR

Front 57

The primary objective of quality assurance program planning conference is to ensure an adequate understanding of all contractors quality assurance requirements relative to a specific what?

Back 57

TM ACQUISTION

Front 58

What is convened to ensure that the contractor/preparing activity is experienced in the lastest TM specifications that source data is adequate and available to the writer and that all other logistics elements affecting the manual are in place or programmed?

Back 58

GUIDANCE MEETING

Front 59

What is specifically designed and implemented to generate improved government quality control contractor coordination and communication during the TM preparation stages?

Back 59

IN PROCESS REVIEW.. IPR

Front 60

What was developed and imposed in contracts in an effort to detect and correct technical errors in data being developed for fleet operation and maintenance prior to manual issue?

Back 60

VALIDATION

Front 61

What is a proofing process by which the navy assures adequacy accuracy and usability of the TM in the users environment?

Back 61

VERIFICATION

Front 62

Verification is conducted by using approved production equipment and navy approved support equipment under the coordination responsibility of a what?

Back 62

NATEC QA SPECIALIST

Front 63

What review is convened and chaired by NATEC QA specialist who is assisted by fleet technical personnel to determine TM accuracy adequacy and usability?

Back 63

ADEQUACY

Front 64

What is a review performed on some NAVAIR manuals that are being considered for change or revision to ensure that they meet the needs of the user?

Back 64

FLEET REVIEW

Front 65

Fleet reviews are normally convened by the technical manual cognizant field activity or NATEC QA specialist and are assisted by a team of what?

Back 65

FLEET TEXHNICIANS

Front 66

WORK PACKAGE 01400

Back 66

01400

Front 67

Technical publication deficiencies are prepared IAW the naval aviation maintenance discrepancy reporting program and reported using what process?

Back 67

TECHNICAL PUBLICATION DEFICIENCY rREPORTING.. TPDR

Front 68

What is defined as a TM lacking some form of quality faculty or characteristic necessary for accuracy and completeness?

Back 68

DEFICIENCY

Front 69

There are how many types of manu8 to support naval aviation?

Back 69

TWO

Front 70

Refer to COMNAVAIRFORINST 4790. 2 and what else for a complete description of types of TMS and detailed instructions on the use and transmittal of TPDRS?

Back 70

OPNAVINST 8000. 16

Front 71

What is required when a technical publication deficiency is detected which if not corrected could result in death or injury to loss of aircraft equipment or facilities?

Back 71

CATEGORY 1 TPDR

Front 72

A CAT 1 TPDR priortt message shall be submitted within what time frame after discovery of a diciency?

Back 72

24 hrs

Front 73

What is required when a non safety related technical data deficiency results in ineffective maintenance practices that directly impacts mission accomplishment in an adverse manner causing a maintenance delay of eight hours or more?

Back 73

CATEGORY 2 TPDR

Front 74

Category 3 TPDR or CAT3 is a no safety related technical data deficiency for which an acceptable workaround caused a maintenance delay of less than how many hours?

Back 74

8 hours

Front 75

What is a technical data deficiency of a non technical or administrative nature that has no safety or mission impact?

Back 75

CATEGORY 4 TPDR

Front 76

Every effort shall be made to complete resolution and issue corrective action within how many days of receipt of CAT 1 TPDRs?

Back 76

30

Front 77

A final report may take the place of a preliminary response if final resolution is determined within how many working days of receipt of CAT 1 TPDR?

Back 77

FIVE

Front 78

What publications include flight manuals NATOPS checklists passenger information cards and ditching and bailout placards?

Back 78

NATOPS

Front 79

Deficiencies are reported under the NATOPS and aircraft tactical manual programs by submitting a NATOPS tactical change recommendation, what form or by other acceptable means are specified in OPNAVINST 3710. 7?

Back 79

OPNAV FORM 3710/6