• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/13

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

13 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)

MUD: I-1) due to fluctuating pressures a _ shall be installed on the street side of the meter.

A) tempature and pressure relief valve


B) a max pressure gauge


C) reduced pressure zone backflow preventor


D) pressure reducing valve

D) pressure reducing valve

MUD: II-2; 5) the obtaining of water service so as to avoid _ for such service, including but not limited to tampering with a meter creating a bypass or ervice connection without a meter.

A) metering


B) payment


C) backflow protection


D) pressure reduction

B) payment

MUD: II-3; 6) all piping, equipment, and water cunsumption are the responsability of _ .

A) M. U. D.


B) plumbing contracter


C) customer


D) Omaha

C) customer

MUD: III-1; 1.abc) application and permits shall be required for all water service or private water line. work will be completed within _ or the process will be repeated.

A) 6 months


B) 1 year


C) 18 months


D) 2 years

B) 1 year

MUD: III-2; 2) all work requiring an application is subject to _ by the district.

A) scrutiny


B) completion order


C) inspection


D) shut off

C) inspection

MUD: IV-1; 2.1) taps shall not be made on the main any closer than _ .

A) 6"


B) 1'


C) 18"


D) 2'

C) 18"

MUD: VI-1; 2.b) a tap shall not be located on what type of branches?

A) private


B) oversized


C) hydrant


D) dead end

C) hydrant

MUD: IV-1; 2.b) when is it allowed to put a tap in an intersection.

A) double fees


B) anytime


C) approved due to structure


D) never

D) never

MUD: IV-1; 3.b.1) a corporation stop shall be used for servic taps _ .

A) 1 1/2" & smaller


B) 2" & smaller


C) 2" & larger


D) larger than 2"

B) 2" & smaller

MUD: IV-1; 3.b.2) taps larger than 2" shall be installed by using a tee or a tapping sleeve and a _ valve.

A) butterfly valve


B) globe valve


C) gate valve


D) ball valve

C) gate valve

MUD: IV-1; 3.c) the tap size shall be _ the size of the service.

A) larger


B) equall


C) smaller


D) greater than or equall to

D) greater than or equall to

MUD: IV-1; 3.d) size of taps that may be nade on a four inch main?

A) 3/4"


B) 1"


C) 1 1/2"


D) 2"

B) 1"

MUD: IV-1; 3.d.2)

A)


B)


C)


D)

C)