Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
39 Cards in this Set
- Front
- Back
What number for an item of supply consists of a four digit FSC group and class and a nine-digit national item identification number(NIIN)?
|
National Stock Number (NSN) |
|
Which term refersto the inventory manager and technical advisor of each category of material in the supply system? |
Material cognizance |
|
What are two-character, alpha numeric codes prefixed to national stock numbers? (Page 2-2)
|
Cognizance symbols
|
|
Issue of a revision normally takes place when what percent or more of the document is affected by a single change or accumulated changes, or in the event manual use would be impaired because of change complexity? |
60 |
|
How many cognizance symbols are currently in use?(Page2-2
|
94
|
|
The majority of stock transactions aboard shipuse what cognizance symbols?(Page2-2)
|
1H, 9B and9Q
|
|
What is used to segregate items into manageable groupings(fast, medium,orslow movers) orto relateto field activities special reporting and controlrequirements? (Page 2-5)
|
Material Control Code(MCC) |
|
The MCC occupies what card column of the transaction detail card or MILSTRIP requisition?
|
73
|
|
What system is designed to classify all items of supply used by the Federal Government?
|
Federal Supply Classification (FSC)
|
|
As presently established, the FSC consists of how many groups (some currently unassigned)?
|
78
|
|
The Federal Supply Classification (FSC) is a how many-digit number that occupies the first part of an NSN?
|
4
|
|
The NCB code is a two-digit code that occupies what positions of a NATO stock number?
|
5th and 6th |
|
The national item identification number(NIIN) is a how many-digit number that identifies each item of supply used by the DoD?
|
Nine |
|
What adds information to the National Stock Number?
|
SMIC
|
|
Whatis used to identify the items before an NSN can be assigned
|
NavyItem ControlNumber(NICN) |
|
The NICN is a how many-digit number that identifies an item of supply?
|
13
|
|
What may be assigned to shipboard stocked consumable items that are not identified by an NSN, a NATO stock number, or another type of NICN?
|
Local item control numbers (LICN) |
|
Whatis a plan for classifying,indexing andnumbering Navy technical manuals to encourage standardization and modernization?
|
TMINS |
|
Which code replaced the FederalSupply Code forManufacturers(FSCM)?
|
Commercial and Government Entity(CAGE) |
|
Marking of iron and steel (ferrous) and other metal (nonferrous) productsis covered by what?
|
FEDSTD-183C |
|
What contain the items authorized and recommended quantities thatshould be on hand andprovide descriptivedata that associate a material requirement toan NSN?
|
Allowance Lists |
|
What reflect the range and depth of material carried by CombatLogistics Forces (CLF) ships(including tenders andrepair ships), or bases to fulfill assigned supply support of fleet units?
|
Load Lists |
|
Complete and accurate management datamust be available for requisitioning purposes and for effective financial andinventory controlof material. What provides the basic management data?
|
Management List-Navy (ML-N) |
|
The General Services Administration (GSA)Federal Supply Catalog lists approximately how many line items thatare stocked in GSA supply distribution facilities?
|
20,000 |
|
What is designed to assist the fleetin identifying theNSN items that are most frequently requested by ships?
|
Afloat Shopping Guide(ASG) |
|
What provides information concerning the use,procurement, receipt, storageand expenditure of hazardous material?
|
HMIS |
|
Whatis printed and issuedby the authority of NAVAIR and is used as reference for identifying and ordering replacement items?
|
IPB |
|
What lists repairable assemblies under the cognizance of NAVSUP WSS or NavalAir Systems Command (NAVAIR)?
|
NICP P-2300 |
|
What serves as master reference list for identifying and requisitioning all parts of replacement significance required to support the repairable assemblies listed in Section P-2300?
|
NICP P-2310 |
|
What provides additional information of interchangeability data shown in P-2300 and P-2310?
|
NICP P-2330
|
|
What provides information in theproper waysof protecting material for shipment?
|
NICP C0030
|
|
Which listis designed to improve management of repairable components by identifying the Remain-In-Place (RIP) items?
|
CRIPL-01 |
|
What provides maintenance activities with ability to relate maintenance capability to repairable components?
|
Individual Component Repair List |
|
What specify the type and quantity of equipment, equipage, repair partsand supporting materials thata shipin commission is required to carry on board?
|
Allowance lists |
|
What contains items authorized and recommended quantities that should be on hand and provides descriptive data that associates a material requirement to an NSN?
|
COSAL |
|
What lists the items and quantities of aeronautical material authorized to bestocked by CV/CVN/LHA/LHDship types to support the maintenance and operations of embarked aircraft?
|
AVCAL |
|
What reflect the range and depth of material carried by Combat Logistics Forces (CLF) ships (including tendersand repair ships), or bases?
|
Load lists |
|
What provides a source of current information needed by supply and maintenance personnel?
|
Central TechnicalPublications Library (CTPL)
|
|
|
|