Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
84 Cards in this Set
- Front
- Back
How many outputs from the crossover on a mono Bi-Amp System?
|
2
|
|
The range of the cut off frequency point between the low and the mid range on a Tri Amp system is between?
|
50 - 200Hz
|
|
The Order of Sending the Oscillator to any given Mix Output on the Yamaha M7CL-48 is?
|
1)From Touch Screen Press Monitor
2)Enable Oscillator Output 3)Press pop-down menu 4)Assign Oscillator desired Output 5)Master outputs up to unity 6)Send level from Oscillator |
|
What are two useful applications for the return lines?
|
1)Bring the crossover outputs from the drive rack in the FOH back to the stage amplifiers
2)Talk back mic 3)Monitor Mixes 4)Clear Com |
|
What is the system signal path on a stereo quad?
|
Source - Split - Console - EQ - Crossover > feeds 8 outputs for stereo quad Hi, HI-Mid, Mid, Low-Mid, Low > through return lines to the Amplifiers on the Stage.
Source -Split - Console - EQ - Crossover - Amplifiers - Drivers |
|
What are the 6 Outputs that feed the 5.1 system from the Yamaha M7CL - 48?
|
14 - CENTER
15 - LEFT 16 - RIGHT 1-REAR LEFT 2-REAR RIGHT 3-SUB |
|
TRUE/FALSE
You can activate the phantom power on any console if using the active split |
False
Only the console that takes the main feed from the active split can have phantom. |
|
Beyer M88
Electro Voice Re20 Sennhieser e602 SM87 SM98 SM91 Audix OM5 Sennhieser MD421 Crown PCC 160 Shure B52 |
Beyer M88 - Dyn
Electro Voice Re20 - Dyn Sennhieser e602 - Dyn SM87- Con SM98 - Con SM91 - Con Audix OM5 - Dyn Sennhieser MD421 - Dyn Crown PCC 160 - Con Shure B52 -Dyn |
|
How do you enable phase on a channel on the Yamaha M7CL-48?
|
1)Press select on desired channel
2)Press HA twice 3)Enable Phase Reverse |
|
The order of assigning the Mute Master on the Yamaha M7CL-48?
|
1)From Touch Screen press Setup
2)Press User Setup 3)Select User Define Key on the tab at bottom 4)From Touch Screen press the desired User Defined Key Number (1-12) 5)From Touchscreen press function window, Scroll to Mute Maser 6)From Touchscreen press parameter window, select scroll to desired mute group number (1-8) 7)Close Window |
|
The type of speaker system of the stage wedges are?
|
Active
Self Powered Bi-Amp |
|
Does Active Split Require Phantom Power From the Console?
|
No
You can provide phantom from the active split by itself |
|
Three Most common used kick drum Mics
|
SM 91 Condenser
Beta 52 Dynamic Beyer M88 Dynamic AKG D112 Dynamic AKG D12 Dynamic |
|
What are the Dimensions of the Yamaha M7CL - 48?
|
48 - Channel Inputs
16 - Omni Outputs |
|
How do you apply phantom power +48v on the Yamaha M7CL - 48?
|
1)Press Setup
2)Enable 48v Master 3)Press select on desired channel 4)Press head amp twice 5)Enable phantom on channel |
|
How would you feed the Broadcast truck with all of the inputs from the sage?
|
Your only output will be from the split.
|
|
As the FOH engineer your talk back microphone is patched from ch. 40 on the house console. That channel is assigned to a master bus so you can make an announcement to the crowd from the FOH Console.
You also need to talk to the band on stage for doing sound check. How are you going to do that? |
Take an Aux or an Omni Output
Plug a return line to the monitor console from FOH console MUST Send it to stage Pre the fader |
|
How do you Assign any given ch. on the Yamaha M7CL-48 to be controlled by a DCA? Mute Group?
|
1)From touch screen press Ch. Job
2)Press DCA/Mute Groups 3)Select DCA Number (1-8) 4)Press select on selected channels 5)Close Window |
|
Do Active DI require phantom power?
|
Hell yeah
|
|
FOH
|
Active
Self Powerd Tri Amped System Meyer CQ2 -Bi-Amped +Meyer 750P - Sub for Low Freq =Tri Amped |
|
Stage Wedges
|
Self Powerd
Bi-Amped |
|
JBL
|
Passive
Powerd by amp in Rack Full Range |
|
Mackie Sub
|
Self-Powered
Crossover after the Amp |
|
Bi Amp Filters
|
Between the Low and the High
800 - 2.5kHz |
|
Tri-Amped Filters
|
Between the Low and the Mid
5oHz-200Hz Between the Mid and the High 800hz - 2.5kHZ |
|
Quad Amp Filters
|
Between the Low and the Low-Mid
50Hz - 135Hz Between the Low-Mid and the Hi-Mid 450Hz - 700 Hz Between the Hi-Mid and the Hi 800Hz - 2.5kHz |
|
Best Mics for Snare?
|
SM 57 - Dyn
SM55 - Dyn SM56 - Dyn Beta 56 - Dyn AKG C414 - Condensor AKG 421 - Condensor |
|
DI boxes
|
Active
Passive Countryman Radian |
|
Best Guitar Mics
|
SM 57 - Dyn
KSM 32 - Condenser e609 - Dyn |
|
Piano Mics
|
Crown PCC 160 Condenser
SM 57 With rag in hole |
|
What are the two types of splits?
|
Active - Requires Power (electricity)
Passive - does not require power because it has internal transformers |
|
Inverse Square Law
|
Doubling the distance from the source will result in 6dB of gain reduction
|
|
Talk Back to Stage
|
Aux Out - Talk back to Band
Return Line - To monitor console from FOH Monitor - Aux out thru return line. The send must be pre fader |
|
All Aux sends by default are?
|
Post-Fader
So send the Aux for Talk Back Pre Fader |
|
Master Outputs are Always
|
Set to Unity Gain
|
|
Amplifiers Must See
|
Unity Gain
|
|
Master outputs are always up to unity gain before?
|
The Sends
|
|
Default of an Aux Send is Always
|
Post Fader
|
|
Any signal from the FOH console, to the band on stage the output is always?
|
An Aux
*and sent thru a return line |
|
Any Signal from the FOH through an Aux to a band on stage the send MUST BE?
|
Pre Fader
|
|
How to set Ch. Link
|
1)From touch screen press Ch. Job
2)From touch screen press Ch. Link 3)Press and hold select on Ch. while pressing select on another desired Ch. |
|
How do you add an Insert on a Ch. on The Yamaha M7CL - 48
|
1)Press select on desired ch. input or output
2)From touch screen press insert 3)Press output 4)Apply insert to slot #1 on desired slot # 5)Press input 6)Apply insert to slot #1 7)Enable insert on |
|
How to do 2 Track Recording on the Yamaha M7CL-48?m mi
|
1)From center logic section press Matrix
2)From Touch Screen Press Name of matrix #1 3)Assign Matrix # 1 to desired omni output 4)Press Select on Matrix #2 5)Assign Matrix #2 to the desired omni output 6)Matrix outputs up to unity and turned on 7)Press select on the stereo Bus 8)Send left to Matrix #1 and Right to Matrix #2 |
|
How to launch studio manager 2
|
1)From computer dock launch Studio Manager 2
2)Double click the console icon 3)From the window menu select Re-Synchronization 4)Press OK for default setting: Console to PC 5)Select desired Windows |
|
US Power?
Rest of the world Power? |
120v @ 60Hz
240v @ 50Hz |
|
Single Phase Power Colors
|
Ground - Green
White - Neutral Black - Hot |
|
Two Phase Power Colors
|
Ground - Green
Neutral - White Black - Hot Red - Hot |
|
Three phase power colors
|
Ground - Green
Neutral - White Black - Hot Red - Hot Blue - Hot |
|
Neutral + Hot =
Neutral + Ground = 2 Hots = What would create a buzz or humming sound in the system. |
120v
0v 240v Any voltage readings more than a half a volt between the Ground and Neutral |
|
Order of Connecting the Power
|
1)Ground
2)Neutral 3)Hot |
|
Order of Disconnecting
|
1)Hot
2)Neutral 3)Ground |
|
Distribution box feeds the
|
5 Wire
|
|
5 wire feeds the
|
Breakout Box
|
|
Power Cables for Wedges
|
Neutrik
NL4 NL8 EP4 EP6 |
|
Monitor Console is a
|
Soundcraft SM20
40 Ch. Input 20 Output |
|
How to assign Pink Noise
|
1)Assign OSC to All Buses
2)Master Output up to Unity 1 @ a time 3)Send level from OSC |
|
Why is the system EQ always inserted on the mix output?
|
Because if it was not you could not here the EQ
It has to interrupt the signal in order to come back and then be heard and monitor able |
|
How do you insert the EQ on the Stagecraft SM 20
|
1)Send of the insert is Pre Master output fader
2)Send any channel to mix output 3)Get goold level on the mic pre 4)Solo PFL Ch. Input 5)Cue wedge fader up, monitor, eq, compress, etc 6)Solo Clear, cue wedge fader down 7)Solo or AFL desired mix outputs 8)Cue Wedge Up 9)Send Signal from channal to output 10)If post - send channel fader @ unity befor sending 11) If Pre send - Apply pre on the desired send before sending |
|
Amplifier Rack
|
Amplifiers
|
|
What two components that define the drive rack
|
EQ
Crossover |
|
The lighting console Is a
|
Grand MA
MIDI protocol |
|
The Grand MA has how many outputs?
What are they? |
6 Outputs = A,B,C,D,E,F
Each output can carry 512 MIDI channels |
|
Please explain how to set up and patch ONE active monitor mix on the stage in Meyer Hall, indicating all the inputs and the Outputs
|
Mix Output,
To the Crossover input, Out Crossover To the EQ input, Out EQ To The amp and monitor on stage |
|
If you patch the mix output on the monitor console to the EQ, monitor engineers would not be able to monitor the EQ in their Cue wedge. Please explain how to reconfigure the system to be able to monitor that EQ on the cue Wedge. In Details.
|
Patch the EQ in from the send and the return Before the Mix Output
|
|
How many outputs from the crossover in a passive speaker with a hi and low frequency drivers
|
2
|
|
How are you able to feed signal from multiple amplifiers to one speaker with an NL8 connector
|
from the amplifiers With a bannana clip to a speaker Patch Bay where it would be soldered in.
|
|
Lead singer Randy McCandy from the rock band Hot Mittens asked for his vocals on channel 28 in his mix #3. After following all the proper steps, you ended up sending his vocals to his mix pre the channel fader. He was happy and pleased but after a few minutes he asked if you could add some reverb to his vocals. Yamaha Rev 500 is patched through mix 18 output and returns on channel 37. Please explain in Detail the proper order of adding the reverb.
|
Send the Vocals on Ch. 28 Pre Fader to Mix 18.
PFL Channel 37 To make sure you are Receiving Wet Signal Take the Return from Ch. 37 Pre Fader and send it to his Mix on #3 Monitor Your Mix on Ch. #3 by AFL listening to his mix on the Cue Wedge Clear solos and Send |
|
Please explain how to send the pink noise on the Soundcraft monitor console to any given mix output.
|
1)Assign OSC to All Busses
2)Master Output up to Unity 1 at a Time 3)Send Level from the OSC |
|
As a FOH engineer during sound check, you realized that the Saxophone on channel 19 on the FOH console sound really bad. You called the stage monitor engineer over the clear-com system and we informed that the channel on the monitor console sounds fine. There are two possibilities for this problem. Please trouble shoot.
|
1) The Channel I/O is bad on the console
2) The Channel line from the split is Bad |
|
Dynamic or Condenser
AKG C3000 Sennheiser e602 Beyer M 88 Shure Beta SM 87 Shure SM Beta 98 AKG D112 Audix OM 5 Shure Beta 52 EV RE20 Sennheiser MD421 |
AKG C3000 Condenser
Sennheiser e602 Dynamic Beyer M 88 Dynamic Shure Beta SM 87 Condenser Shure SM Beta 96 Condenser AKG D112 Dynamic Audix OM 5 Dynamic Shure B52 Dynamic EV RE20 Dynamic Sennheiser MD421 Dynamic |
|
How are you able to patch the Yamaha REV 7 (TBP) to the Ramsa 40 X 18 monitor console including the cable patch indicating the inputs and outputs
|
Mix Output > TBP > Open Ch. Line Input > Send is Pre Fader
|
|
Name two useful applications for an Aux send
|
TBP
Talk Back Mix Output |
|
Meyer Hall PA system is defined as
|
Self Powered active tri-amped system
|
|
Please explain how to send the pink noise to the rear right speaker in the FOH system from the Yamaha M7CL
|
1)Select Monitor
2)Turn on Output 3)Select Dropdown from OSC section 4)Select Mix 2 5)Assign and Turn on Faders including master 6)Bring up OSC Level |
|
How much voltage between blue and black in a single or 2 phase power system
|
There is no Blue in a single or 2 phase power system
|
|
Please explain how to use the FOH talk back microphone on channel 48 to talk to the band on stage
|
Aux output through return lines back to the stage Pre Fader
|
|
How many circuit breakers for each 5 wire connector outputs from the Distribution Box?
|
3
|
|
Please explain the signal path from the source on stage to the loud speakers in a tri-amp FOH system.
|
Source > Split > Console > EQ > Crossover (8 Outputs) > AMPS > Drivers
|
|
What makes a system active?
|
In an active system the crossover feeds the amplifiers
|
|
What is a system comprised of
|
Speakers and Amps
|
|
What is +48v
|
The maximum voltage allowed by the FCC
|
|
What is the difference between an active split and a passive split?
|
-An active Split has only one output that feeds phantom power
-A passive split when fed phantom power from the console will split that phantom power to the other two isolated outputs |
|
Can a send and a Return be on one cable
|
Yes
|
|
T.B.
|
Aux out thru return lines to stage
|