Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
27 Cards in this Set
- Front
- Back
Define the purpose of the Naval Aviation Safety Program.
|
To preserve human and material resources.
|
|
Explain the safety responsibilities of the Commanding Officer.
|
Requires all to be instructed and drilled in all precautions and procedures. If none issued CO will issue or augment.
|
|
Explain the safety responsibilities of the Aviation Safety Officer.
|
Advisor to the CO on all aviation safety matters. Assists in est. and mang. of Command Aviation Safety Program.
|
|
Explain the safety responsibilities of the
|
Advisor to the CO on all ground safety matters. Assists in est. and mang. of Command Ground Safety Program.
|
|
Explain the safety responsibilities of the Department Head.
|
Coordinates Dept's safety program with Unit Safety officer & supervises Division Safety Officer. Ensures personnel are instructed and drilled.
|
|
Explain the safety responsibilities of the Division Officer.
|
Ensures all personnel comply with all safety instructions. Prepares and submits additional inst's if necessary.
|
|
Explain the safety responsibilities of the Safety Petty Officer.
|
Ensures all personnel are instructed in all safety matters. Central POC for all safety matters.
|
|
Explain the safety responsibilities of All Hands.
|
All will familiarize themselves w/ reg's & inst's applicable to them. Comply w/ CSP and OPNAVIST 3750.6.
|
|
Explain the functions of the Safety Council/Enlisted Safety Committee.
|
Sets goals, manage assets, review safety recommendations. Ground, Aviation & Aeromedical are standing members. Reps from other activities.
|
|
Discuss how human error contributes to aviation mishaps.
|
Is part of nearly every mishap. Involves physical and mental factors.
|
|
Discuss how Maintenance and support factors contribute to aviation mishaps.
|
Improper maintenance, priority assignments or QA. Can be caused by way made, assembled or installed.
|
|
Discuss how Administative and supervisory factors contribute to aviation mishaps.
|
Regulation enforcement. Lack of supervision or failure to require PQS. Lack of formal and informal training.
|
|
Discuss how material failures and malfunctions contribute to aviation mishaps.
|
Faulty design, defective manufacture, or repair. Most of these may actually be maintenance factor or human error.
|
|
Discuss how environmental factors contribute to aviation mishaps.
|
Acts of God. Extreme exposure to heat, cold, vibrations, noise, illumination, radiation, or aatmospheric contaminants.
|
|
Define Class A mishap.
|
Total cost of damage is $1,000,000 or more, or injury/illness results in fatality or permanent disability.
|
|
Define Class B mishap.
|
Total cost of damage is $200,000 to $1,000,000 ro injury/illness results in permanent partial disability or 3 or more personnel hospitalized inpatient.
|
|
Define Class C mishap.
|
Total cost of damage is $20,000to $1,000,000. Loss of time beyond day/shift incident occured or non-fatal illness/disease causing loss of time from work.
|
|
State the objective of the Aviation Gas-Free Engineering Program.
|
Ensure a safe environment is maintained when working on areonautical equip fuel systems. NA 01-1a-35. QAR CDQAR w/ AVGFE course.Insufficient demand is less than 3 GFE req's in 6 months.
|
|
Explain the hazards associated with Radio Frequency (RF) energy.
|
RF energy can generate elec currents/voltage causing elec shock, burns, biological dameag and cataracts. Unwanted activation of EED can cause sparks that ignite flammable materials.
|
|
State the purpose of Laser Safety Hazard Control Program.
|
Design a series of safety factor to use when using lasers. Laser System Safety Officer, est. reg., SOPs, eyewear, signs, training, etc.
|
|
State the Purpose of a safety stand down.
|
To devote time to safety training.
|
|
Discuss the concept of Operational Risk Management (ORM).
|
Systematic, decision-making process used to identify & manage hazards that endanger naval resources. Increase operational readiness & potential for success.
|
|
Explain "Identify Hazards" as it applies to ORM.
|
Outline/chart major steps. Conduct hazard analysis: list hazards of steps & causes for them.
|
|
Explain "Assess Hazards" as it applies to ORM.
|
Determine degree of risk of each hazard in terms of probability & severity. Matrix is helpful.
|
|
Explain "Make Risk Decisions" as it applies to ORM.
|
Take each risk and select controls. Decide if benefit outweighs risk.
|
|
Explain "Implement Controls" as it applies to ORM.
|
Measures used to eliminate hazards or reduce risk. Engineering, administrative, & PPE.
|
|
Explain "Supervise" as it applies to ORM.
|
Conduct follow-up eval of controls ensuring they remain in place w/ desired effect. Monitor for changes. Take action when necessary.
|