Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
33 Cards in this Set
- Front
- Back
AN or MS20470 |
Universal head |
|
AN or MS20426 |
Countersunk head |
|
2017 & 2024 |
Icebox rivets |
|
1100 |
Alloy code A. Non structural use |
|
2117 |
AD code. Dimple |
|
2017 |
D code. RAISED DOT |
|
2024 |
DD CODE. DOUBLE DASH |
|
5056 |
B code . Raised cross. Magnesium allow sturctures |
|
7050 |
E CODE. RING O (head marking) |
|
Mild steel |
No letter. Recessed triangle. Used in steel/stainless steel |
|
18-8 |
F. Recessed dash. Stainless steel structures |
|
Monel |
M . No marking. Nickel-steel alloys |
|
Copper |
C. No marking . Seat belts Interiors |
|
Rivets are designed for what kind of load |
Shear loads |
|
Rivet lengths are measured in? |
1/16ths |
|
Rivet diameters are measured in? |
1/32nds |
|
How do you find rivet diameter? |
2nd to last letter |
|
What is rivet length formula |
(Last letter for grip) grip+(1.5D) |
|
What is edge distance |
Distance from the edge to the rivet |
|
What is rivet pitch |
Distance between rivets in the same row |
|
Minimum rivet pitch is |
Minimum is 3. Average is 6 to 8 times the diameter |
|
#40 drill bit |
3/32. Uses silver cleco |
|
#30 drill bit |
4/32 . Uses copper cleco |
|
#21 drill bit |
5/32. Black cleco |
|
#10 drill bit |
6/32. Gold cleco |
|
Bucking bar size #3 rivets |
2-3 lbs |
|
Bucking bar size #4 rivets |
3-4 lbs |
|
Bucking bar size #5 rivet |
3-4.5 lbs |
|
Bucking bar size # 6 rivet |
4-5lbs |
|
Dimple what kind of material |
Thin material |
|
Countersink what kind of material |
Thick material |
|
What should be done to elongated drill holes |
Oversize the holes |
|
Buck tail dimension should be |
0.5H x 1.5D |