• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/24

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

24 Cards in this Set

  • Front
  • Back
how many bits are in an ipv4 address?
32
An ipv6 enabled device send a data packet with the destination address of FF02::1. What is the target of this packet?
All ipv6 enabled nodes on the local link.
When will a router drop a traceroute packet?
When the value of the TTL field reaches zero.
What are the two types of ipv6 unicast addresses?
link local in the loop back.
what is the decimal equivalent of the hex number 0x3F?
63
What is the prefix length notation for the subnet mask 255. 255. 255. 224?
/ 27.
Which two statements are correct about ipv6 and ipv6 addresses?
Ipv6 addresses are represented by hexadecimal numbers and ipv4 addresses are 32 bits in length.
Which two statements describe characteristics of layer 3 broadcasts?
Routers create broadcast domains and a limited broadcast packet has a destination IP address of 255. 255. 255. 255.
When a Cisco router is being moved from an ipv4 network to a complete ipv6 environment, which series of commands would correctly enable ipv6 forwarding and interface addressing?
When an ipv6 enabled host needs to discover the MAC address of an intended ipv6 destination, which destination address is used in the NS message?
Solicited node multicast address.
Which network migration technique encapsulates ipv6 packets inside ipv4 packets to carry them over ipv4 network infrastructures?
Tunneling.
What are three parts of an ipv6 global unicast address?
An interface ID that is used to identify the local host on the network,

a subnet ID that is used to identify networks inside of the local enterprise site,

a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP.
Which ipv6 address is most compressed for the full FE80:0:0:0:02AA:FF:FE9A:4CA3 address?
FE80::2AA:FF:FE9A:4CA3
Which two parts are components of an ipv4 address?
Network portion

host portion
DHCP server is used to assign IP addresses dynamically to the host on the network. The address pool is configured with 192. 168. 10. 0/ 24. There are three printers on this network that need to be reserved static IP addresses from the pool. How many IP addresses in the pool or left to be assigned to the other hosts?
251
Which two things can be determined by using the ping command?
The average time it takes a packet to reach the destination and for the response to return to the source

whether or not the destination device is reachable through the network.
A message is sent to all hosts on remote network which type of message is it?
Directed broadcast.
Which two ICMP messages are used by both ipv4 and ipv6 protocols?
Protocol unreachable

route redirection
Which message is displayed on the web server in packet tracer activity for the test?
Correct configuration!
What is indicated by a successful ping on the ::1 ipv6 address?
IP is properly installed on the host.
The decimal equivalent of the binary number 10010101 is ___?
149