Ccna Part 2 Module 4

Front 1

CDP is a Layer ______ protocol that connects lower physical media and upper network layer protocols.

Back 1

2
two

Front 2

CDP is a Layer 2 protocol that connects ______ physical media and upper network layer protocols.

Back 2

lower

Front 3

CDP is a Layer 2 protocol that connects lower physical media and ______ network layer protocols.

Back 3

upper

Front 4

______ is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the router interfaces they are connected to, the interfaces used to make the connections, and the model numbers of the devices.

Back 4

CDP

Front 5

CDP is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the router interfaces they are connected to, the ______ used to make the connections, and the model numbers of the devices.

Back 5

interfaces

Front 6

CDP is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the router interfaces they are connected to, the interfaces used to make the connections, and the ______ of the devices.

Back 6

model numbers

Front 7

CDP is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the ______ they are connected to, the interfaces used to make the connections, and the model numbers of the devices.

Back 7

router interfaces

Front 8

CDP is media and ______ independent, and runs on all Cisco equipment over the Subnetwork Access Protocol (SNAP).

Back 8

protocol

Front 9

CDP is media and protocol independent, and runs on all Cisco equipment over the ______.

Back 9

Subnetwork Access Protocol (SNAP).

Front 10

CDP is media and protocol independent, and runs on all ______ over the Subnetwork Access Protocol (SNAP).

Back 10

Cisco equipment

Front 11

______ is the most recent release of the CDP protocol.

Back 11

CDP Version 2 (CDPv2)

Front 12

Cisco IOS Release 12.0(3)T or later supports ______. CDP Version 1 (CDPv1) is enabled by default with Cisco IOS Release 10.3 to 12.0(3)T.

Back 12

CDPv2

Front 13

Cisco IOS Release 12.0(3)T or later supports CDPv2. CDP Version 1 (CDPv1) is enabled by default with Cisco IOS Release ______.

Back 13

10.3 to 12.0(3)T

Front 14

Cisco IOS Release 12.0(3)T or later supports CDPv2. CDP Version ______ is enabled by default with Cisco IOS Release 10.3 to 12.0(3)T.

Back 14

1 (CDPv1)

Front 15

When a Cisco device boots up, CDP starts up automatically and allows the device to detect neighbor devices that use ______.

Back 15

CDP

Front 16

When a Cisco device boots up, ______ starts up automatically and allows the device to detect neighbor devices that use CDP.

Back 16

CDP

Front 17

CDP operates at the ______ layer and allows two systems to learn about each other, even if they use different network layer protocols.

Back 17

data link

Front 18

CDP operates at the data link layer and allows two systems to learn about each other, even if they use different ______ layer protocols.

Back 18

network

Front 19

______ operates at the data link layer and allows two systems to learn about each other, even if they use different network layer protocols.

Back 19

CDP

Front 20

Each device that is configured for CDP sends periodic messages, which are known as ______, to directly connected Cisco devices.

Back 20

advertisements

Front 21

Each device advertises at least one address at which it can receive ______ messages.

Back 21

Simple Network Management Protocol (SNMP)

Front 22

Each device advertises at least one ______ at which it can receive Simple Network Management Protocol (SNMP) messages.

Back 22

address

Front 23

Each device ______ at least one address at which it can receive Simple Network Management Protocol (SNMP) messages.

Back 23

advertises

Front 24

The advertisements also contain ______ or holdtime information, which indicates the length of time that receiving devices should hold CDP information before they discard it.

Back 24

time-to-live

Front 25

The advertisements also contain time-to-live or ______ information, which indicates the length of time that receiving devices should hold CDP information before they discard it.

Back 25

holdtime

Front 26

The advertisements also contain ______ or holdtime information, which indicates the length of time that receiving devices should hold CDP information before they discard it.

Back 26

time-to-live

Front 27

The advertisements also contain time-to-live or holdtime information, which indicates the ______ that receiving devices should hold CDP information before they discard it.

Back 27

length of time

Front 28

The advertisements also contain time-to-live or holdtime information, which indicates the length of time that ______ devices should hold CDP information before they discard it.

Back 28

receiving

Front 29

The advertisements also contain time-to-live or holdtime information, which indicates the length of time that receiving devices should hold ______ information before they discard it.

Back 29

CDP

Front 30

The advertisements also contain time-to-live or holdtime information, which indicates the length of time that receiving devices should hold CDP information before they ______ it.

Back 30

discard

Front 31

Use the show cdp neighbors command to display ______ on the local device.

Back 31

CDP updates

Front 32

Use the show ______ command to display CDP updates on the local device.

Back 32

cdp neighbors

Front 33

Use the show cdp neighbors command to display CDP updates on the ______.

Back 33

local device

Front 34

Use the ______ command to display CDP updates on the local device.

Back 34

show cdp neighbors

Front 35

Each router that uses ______ exchanges protocol information with its neighbors.

Back 35

CDP

Front 36

Each router that uses CDP exchanges ______ information with its neighbors.

Back 36

protocol

Front 37

Each router that uses CDP exchanges protocol information with its ______.

Back 37

neighbors

Front 38

Each ______ that uses CDP exchanges protocol information with its neighbors.

Back 38

router

Front 39

An administrator can use the ______ command to display information about the networks that are directly connected to a router.

Back 39

show cdp neighbors

Front 40

CDP transmits ______ to provide information about each CDP neighbor device.

Back 40

type length values (TLVs)

Front 41

An administrator can use the show cdp neighbors command to display information about the networks that are directly connected to a router. CDP transmits type length values (TLVs) to provide information about each ______ device.

Back 41

CDP neighbor

Front 42

______ are blocks of information embedded in CDP advertisements.

Back 42

TLVs

Front 43

CDP transmits type length values (TLVs) to provide information about each ______ device.

Back 43

CDP neighbor

Front 44

TLVs are blocks of information embedded in ______.

Back 44

CDP advertisements

Front 45

TLVs are blocks of ______ embedded in CDP advertisements.

Back 45

information