• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

A key: Read text to speech.a key

image

Play button

image

Play button

image

Progress

1/45

Click to flip

45 Cards in this Set

  • Front
  • Back
CDP is a Layer ______ protocol that connects lower physical media and upper network layer protocols.
2
two
CDP is a Layer 2 protocol that connects ______ physical media and upper network layer protocols.
lower
CDP is a Layer 2 protocol that connects lower physical media and ______ network layer protocols.
upper
______ is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the router interfaces they are connected to, the interfaces used to make the connections, and the model numbers of the devices.
CDP
CDP is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the router interfaces they are connected to, the ______ used to make the connections, and the model numbers of the devices.
interfaces
CDP is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the router interfaces they are connected to, the interfaces used to make the connections, and the ______ of the devices.
model numbers
CDP is used to obtain information about neighboring Cisco devices, such as the types of devices connected, the ______ they are connected to, the interfaces used to make the connections, and the model numbers of the devices.
router interfaces
CDP is media and ______ independent, and runs on all Cisco equipment over the Subnetwork Access Protocol (SNAP).
protocol
CDP is media and protocol independent, and runs on all Cisco equipment over the ______.
Subnetwork Access Protocol (SNAP).
CDP is media and protocol independent, and runs on all ______ over the Subnetwork Access Protocol (SNAP).
Cisco equipment
______ is the most recent release of the CDP protocol.
CDP Version 2 (CDPv2)
Cisco IOS Release 12.0(3)T or later supports ______. CDP Version 1 (CDPv1) is enabled by default with Cisco IOS Release 10.3 to 12.0(3)T.
CDPv2
Cisco IOS Release 12.0(3)T or later supports CDPv2. CDP Version 1 (CDPv1) is enabled by default with Cisco IOS Release ______.
10.3 to 12.0(3)T
Cisco IOS Release 12.0(3)T or later supports CDPv2. CDP Version ______ is enabled by default with Cisco IOS Release 10.3 to 12.0(3)T.
1 (CDPv1)
When a Cisco device boots up, CDP starts up automatically and allows the device to detect neighbor devices that use ______.
CDP
When a Cisco device boots up, ______ starts up automatically and allows the device to detect neighbor devices that use CDP.
CDP
CDP operates at the ______ layer and allows two systems to learn about each other, even if they use different network layer protocols.
data link
CDP operates at the data link layer and allows two systems to learn about each other, even if they use different ______ layer protocols.
network
______ operates at the data link layer and allows two systems to learn about each other, even if they use different network layer protocols.
CDP
Each device that is configured for CDP sends periodic messages, which are known as ______, to directly connected Cisco devices.
advertisements
Each device advertises at least one address at which it can receive ______ messages.
Simple Network Management Protocol (SNMP)
Each device advertises at least one ______ at which it can receive Simple Network Management Protocol (SNMP) messages.
address
Each device ______ at least one address at which it can receive Simple Network Management Protocol (SNMP) messages.
advertises
The advertisements also contain ______ or holdtime information, which indicates the length of time that receiving devices should hold CDP information before they discard it.
time-to-live
The advertisements also contain time-to-live or ______ information, which indicates the length of time that receiving devices should hold CDP information before they discard it.
holdtime
The advertisements also contain ______ or holdtime information, which indicates the length of time that receiving devices should hold CDP information before they discard it.
time-to-live
The advertisements also contain time-to-live or holdtime information, which indicates the ______ that receiving devices should hold CDP information before they discard it.
length of time
The advertisements also contain time-to-live or holdtime information, which indicates the length of time that ______ devices should hold CDP information before they discard it.
receiving
The advertisements also contain time-to-live or holdtime information, which indicates the length of time that receiving devices should hold ______ information before they discard it.
CDP
The advertisements also contain time-to-live or holdtime information, which indicates the length of time that receiving devices should hold CDP information before they ______ it.
discard
Use the show cdp neighbors command to display ______ on the local device.
CDP updates
Use the show ______ command to display CDP updates on the local device.
cdp neighbors
Use the show cdp neighbors command to display CDP updates on the ______.
local device
Use the ______ command to display CDP updates on the local device.
show cdp neighbors
Each router that uses ______ exchanges protocol information with its neighbors.
CDP
Each router that uses CDP exchanges ______ information with its neighbors.
protocol
Each router that uses CDP exchanges protocol information with its ______.
neighbors
Each ______ that uses CDP exchanges protocol information with its neighbors.
router
An administrator can use the ______ command to display information about the networks that are directly connected to a router.
show cdp neighbors
CDP transmits ______ to provide information about each CDP neighbor device.
type length values (TLVs)
An administrator can use the show cdp neighbors command to display information about the networks that are directly connected to a router. CDP transmits type length values (TLVs) to provide information about each ______ device.
CDP neighbor
______ are blocks of information embedded in CDP advertisements.
TLVs
CDP transmits type length values (TLVs) to provide information about each ______ device.
CDP neighbor
TLVs are blocks of information embedded in ______.
CDP advertisements
TLVs are blocks of ______ embedded in CDP advertisements.
information