Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
12 Cards in this Set
- Front
- Back
What should be considered when troubleshooting a problem with the establishment of neighbor relationships between OSPF routers? (Choose three.)
|
OSPF interval timers mismatch
interface network type mismatch inconsistent authentication configuration |
|
which types of networks are OSPF DR elections necessary? (Choose two.)
|
1. broadcast multiaccess
2. nonbroadcast multiaccess |
|
what can be obtained from #show ip ospf interface. pick 3
|
1 timer intervals
2 router id number 3 neighbor adjacencies |
|
how do OSPF routers select the DR and BDR?
|
By highest priority,
highest interface IP addy |
|
2 things found in EIGRP neighbor table.
|
1. network layer address of neighbor routers.
2. number of EIGRP packets waiting to be sent. |
|
EIGRP DUAL stores primary routes where? 2 places
|
1.routing table
2.topology table |
|
why should you config bandwidth settting on EIGRP interface, rather than leaving the default? 2 picks
|
1. suboptimal route may be choosen.
2. network may be unable to converage if bandwidth setting does not match actual bandwidth of the link. |
|
what info is maintained by EIGRP topology database for dest route? 3 thing
|
1 routing proto
2. feasible distance of route 3. router cost as advertisied by neighboring router. |
|
Tables maintained by EIGRP for each proto is supports. 3 things
|
topology table
neighbor table routing table |
|
command to show establised OSPF neighbor adjacencies.
|
#show ip ospf neighbor
|
|
what switching mode changes to store-and-forward mode after it detects a number of errors.
|
adaptive cut-through
|
|
form of buffering used by switches
|
store-and-forward
|