Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
4 Cards in this Set
- Front
- Back
General check for change of shift? |
1. Ensure quick release buckle on the cylinder retaining strap is secure 2. Check that the green hand wheel is closed finger right 3. Check all components are clean and free from damage 4. Ensure that the shoulder and waist straps are fully extended 5. Check that use details are correct on BA tally tag and placed in tally board 6. Check face mask and demand valve are free from damage and debris |
|
Battery check hold for? |
5 seconds |
|
Error with white cross? |
Note alarm code Remove battery Close cylinder valve Depressurise system PARK demand valve Wait 5 seconds Reinsert battery Recommence system self test |
|
If pressure had dropped more than 10bar in 60 seconds? |
Release pressure in BA by operating purge Place BA in park mode Remove cylinder Check high pressure o-ring is present and correctly seated Check no debris in valve or cylinder connection assembly Conduct pressure seal check again |